Use of the Grit - Blasting Machine:
The Grit - Blasting machine, model POTR - K1 - V1 is specified for
blasting of all horizontal hard and rigid surfaces, both metallic and non-metallic.
Smooth surfaces and profiles are reached with lower amounts of blasting
balls and higer tracel speed, rough surface is reachable with higer
grit ball amounts and lower travel speeds.
POTR - K1 - V1
Specification:
| power supply for the whole unit: |
380 V,32 A for CZG plug |
| total el. output |
17,5 kW |
| total machine mass (weight) |
1 140 kg |
| operating width (blasting radius) |
400 mm |
| performace |
up to 300 sq.m/h |
| consumption of blasting medium |
cca 100 g/sq.m |
| recommended blasting medium |
steel balls S 13 |
| scope of application |
dry horizontal surfaces |
| interconnection of machines |
hose,dia 200 mm,1 = 15m |
Movable Grit-Blasting Machine POTR
- K1
| length |
2 000 mm |
|
Impeller El.
|
motor: |
|
Travel El.
|
motor: |
| widht |
560 mm |
|
output |
11 kW |
|
output |
1 kW |
| high |
1 500 mm |
|
rpm |
2 960 |
|
rpm |
3,5 to 84 |
| el. output |
12 kW |
|
|
|
|
travel speed |
0.06 - 1.1m/s |
| mass |
540 kg |
|
|
|
|
impeller diameter |
200 mm |
|
|
|
|
|
|
|
|
| Filtering Unit |
POTR - V1: |
|
Fan El. |
Motor: |
|
Compressor |
El. motor: |
| lenght |
2 100 mm |
|
output |
4 kW |
|
output |
1,5 kW |
| widht |
840 mm |
|
rpm |
2 900 |
|
rpm |
1 400 |
| igh14001400 |
1 500 mm |
|
|
|
|
|
|
| mass |
566 kg |
|
Filtering
|
Property
|
554 DC |
|
|
| el. output |
5,5 kW |
|
Filtering
|
Passage
|
1 630 m3/h |
|
|
|
|
|
noise level
|
incl. 554 DC |
max. 80 dB |
|
|
Description of the Grit-Blasting
Machine:
This complex guarantees dustfree blasting of surfaces whichremain
clean and ready for possible application of protective layers.
Suffcient hardness of the blasted surface guarantes reflection of
the steel balls and their return into the tank Corresponding surface dryness
prevents balls conglomerating and is a necessary precondition for the surcess
of the described principle.
The machine is equipped by electric motors and the whole cycle is
controlled by electropneumatic and electronic control system.
shot-blasting machine is very
effective for:
- very fine blasting of non-glazed ceramic, stoneware and concrete
paving
- very fine blasting of epoxide, polymethylmetacrylate layers and
floors during repair works
- very fine blasting of thin-layer floors
- very fine blasting of cement frout and impuritiers of new or vacuum-treated
concretes
- removal of old paints-varnishes, epacite, sadurite, etc.
- blasting of natural stones and bituminous cold surfaces with higer
content of aggregates
- mid-to rough blasting of old concretes within the scope of 1 to
3 mm and/or more
- cleaning and consolidation of surfaces (caulking by steel balls)
- cleaning of old concretes soaked with oil products
- cleaning of metallic, especially steel surfaces and foundations
Just
click 
this
mailbox
This is the way back ...