CH Non-Food Import-Export Corporation

Dear Sir
subject to prior sale we can offer

1.) Hazardous Waste Incineration Plant - Chemical-Physical Treatment Plant - Evaporation Plant
The incineration plant
Annual throughput - 30,000 tons/annum
daily output -
approx. 120 tons
Hourly average - 5 tons/hr
Heat load - 58 GJ/hr (max.)
Tank farm with 20 tanks of total volume approx. 1,500 m for liquid waste materials
3 storage depots for approx. 200 tons of waste in drums or other containments
4 bunkers for solid/pasty materials with a total volume of 580 m
Incineration plant with rotary kiln technology and post combustion chamber
Rotary kiln - diameter 4 meters, length 12 meters
Post combustion chamber - diameter 5.6 meters, height 22 meters Boiler for steam generation
2 MW turbine for power generation
Slag/ash loading with separation of metallic scrap by a magnetic separator
4-step flue gas purifying plant, consisting of an electric dust precipitation unit,
wet scrubbers, catalytic nitrogen oxide removal plant
and a dry adsorption step with fluidized bed reactor and fabric filter baghouse.

Products and residual materials
Process steam - 17 tons/hr (28 bar, 320C)
Electric power: 2 MW for internal use and supply to the public network.
Approx. 6 MW long-distance energy for internal use and supply to the public network.
Electrical peak load - 2.5 MVA
Installed driving power - 1.5 MW
Average own requirements - 0.9 MW
Approx. 8000 tons/annum slag/ash for recycling and use in landfill construction
Approx. 1,000 tons/annum filter dust
Approx. 5,000 tons/annum waste gas washing water
Approx. 250 tons/annum coarse and fine metallic scrap for recycling in the scrap metal trade
Approx. 35,000 m/hr purified waste gases

Price: Euro 8,5 Mill. EXW Europe "as it is"
Scope and pictures available

===========================================================

2.) 250 MW Oil fired power station.
The plant is unused and in excellent condition
250 MW station comprising a single steam generator/steam
turbine-alternator unit, designed to burn heavy fuel oil.
YOM 1975 and completed in 1979
The sudden unexpected and rapid rise in the price of oil in the 1970's,
and a less than forecast demand for power, a decision
was made to place the station in long term storage.

Maker : Mitsubishi Heavy Industries Ltd, Japan
Serial Number : T-602
Type : Three casing, tandem compound, double flow, condensing, single reheat.
Speed : 3,000 rpm
Nominal Rating : 250,000 kW
Steam Conditions at Turbine Stop Valves -
Pressure : 124 barg
Temperature : 538C
Steam Flow (max) : 748,660 kg/h (786,093 kg/h design)
Number of Extractions : Six (6)
Number of Stages : Fifty-five (55)
Overall Length of Unit : 34 metres
Overall Width of Unit :
8.5 metres Height of unit above
Floor line : 5.0 metres
Design steam conditions are 124 bar gauge and 538C at the turbine stop valves.
Reheat temperature is 538C and the design exhaust pressure is 74 mbar absolute.
The nominal rating of the unit is 250,000 kW at a guaranteed steam flow rate of 748,660 kg/h
hrough the stop valves at 124 bar gauge main steam pressure and 76 mbar absolute back pressure.
We understand it cost US $333 million to construct

Price: US$ 27 Mill. "as it is" only
A full set of instruction and operation manuals are included Scope available
An Indian Company that specialises in the dismantling and re-assembly of this type of equipment
has already visited the site and is familiar with the requirements to relocate it.

===========================================================

3.) 4 x 7,000 kw (7 MW) each - 28,000 KW 60 HZ Diesel generating sets
installed for emergency Power at a Nuclear power Plant.
This sale includes Four diesel driven electric generator power units.
Each unit is self contained, water cooled, with automatic air start.
The engines are Delaval (Enterprise) model DSRV16-4.
The generators were manufactured by Portec and are rated at
7,000KW continuous, for 8,000 hours per year, 6900 VAC, 3 phase, 60 Hz., 0.8 PF. The sale includes:
the engines and all auxiliary components (pumps, day tanks, coolers, interconnecting piping, and engine control cabinets)
the generators and generator control cabinets
the starting air system (compressors, dryers, receivers, and interconnecting piping The subject units are uniquely identified as follows:

AS STANDBY UNITS THEY WERE NEVER USED , HOURS ARE ACTUAL
Unit 1-A (Enterprise S/N 75080-xx42) 1,111    operating hours
Unit 1-B (Enterprise S/N 75081-xx44)    957    operating hours
Unit 2-A (Enterprise S/N 75082-xx45)      1.5 operating hours
Unit 2-B (Enterprise S/N 75083-xx46       0.3 operating hours All four units were ordered in 1975 and delivered in 1977.

The units were designed to provide emergency power.
Units 1-A and 1-B were operated occasionally to provide peaking power.
Those two engines were in service until approximately 20 months ago.
The oil coolers on those two units probably need to be cleaned.
The engines and generators for Units 2-A and 2-B are assembled but all auxiliary piping is not complete
Some parts are missing from the Unit 2 engines, the list of missing components includes,
but is not limited to, one turbocharger, one cylinder head, and two start air compressor motors,
2 electronic governors.
Prospective buyers should inspect the equipment to make a full determination of missing items.

four cycle, 16 cylinder (17" bore X 21" stroke) approximately 9800 brake horsepower at 450 rpm

approximately 506 gallons on fuel per hour at full load (.366 bsfc at full load, 50 in hg boost)

each unit has two Elliot turbo chargers

the units are air start (each unit is supplied by two Ingersoll Rand compressors)

the units in emergency standby service can start, reach operating speed, and begin accepting load within 5 seconds

engine speed and load control is provided by Woodward electronic governor with Woodward mechanical governor backup

synchronous speed is 450 rpm with overspeed trip at 470 rpm

can operate in normal mode or emergency mode, in emergency mode all protective trips are disabled except overspeed and bus differential

engine protective controls are pneumatic with ARO pneumatic logic board and Ronan annunciator

each cylinder has a removable liner

engines are provided with jacket water and lube oil keep warm systems

heat sink for lube oil cooler is provided through jacket water system

heat sink for jacket water is provided by user

pneumatic barring system on each engine

the generators operate at 60 cycles at synchronous speed (450 rpm)

electrical output, 7MW, 8750kva, at 6.9kv, 732 amps, .8 power factor

field is 125 vdc, 244 amps

rated for continuous duty with 10% overload for two hours

*The approximate weight of each component is given below in lbs:
Engine....... ..235,000
Generator........93,000
Base Plate Assembly.........45,000
Starting Air Receiver.........7,100
Exhaust Silencer .........13,500
Engine Cooling Water Heat Exchanger...... 9,100
ngine Control Panel....... 2,000

*The weights given above are for information purposes only.
There are additional components that are not listed.
The buyer should prepare a detailed weight estimate for shipping purposes.
4 x 7,000 KW each( 7 MW )

Price 1.4 Million US$ each of 7 MW unit
NOTE: In order to remove the engines from the building a concrete wall will have to be cut out for each engine.
The buyer is responsible for removal.

===========================================================================

4) Four (4) units of 6640 kW (8905 Hp), HFO Plant

Make : Delaval Enterprise Diesel Engines

New in 1973

Model : DSRV16-4

450 RPM

Start with Light Oil - run on HFO

With four (4) 6415 kW (8019 kVA) Electric Machinery Brushless Generators, 3 phase, 60 Hz, 13.8 kV, 450 RPM, 0.8 PF

These Engines have been operated less than 1200 hours since reconditioning.

Plants can be sold and dismantled immediately.

Asking Price : U$545,000.00 per unit 'as is where is'

===========================================================================

5) There are 10 complete units of the following available:

1. Diesel Enginer : Deutz model BV16M640

2. Generator : Siemens 6350 kW/H

3. Rated output : 6300 kW but with current conditions it would be 5200 kW. This can be brought up by a proper overhaul arrangement.

4. Cylinder Dia : 370 mm

5. Speed : 600 rpm

6. Fuel Oil Consumption : 200-215 g/kWh

7. Lub Oil Consumption : 1.6-2.0 g/kWh

8. Running hours : around 60,000 hours

Price is very attractive, but need extra costs for the overhaul. They are readily available.

===========================================================================

6) General Electric Frame 5 Gas Turbine Generator Set, 17.9 MW, 60 Hz,

Zero Hour Condition

The turbine generator set was refurbished in 1998 by Sulzer Hickham, Inc.

Manufacturer: General Electric

Model: Frame 5M

Turbine Serial Number: 179452

Generator Serial Number: 8384369

Fuel: Natural Gas

Starting Method: Electric Motor

Rated: 17.9 MW ISO, 60Hz

Generator: 21,176 KVA, 08.85 P.F., 12.6 KV, 970 Armature Amps., Exciter Voltage – 250 DC, Exciter Amps – 201

Performance "as published" when new:

Heat Rate: 13,900 BTU/KW-HR/Gas

Firing Temp: 1700° F

Exhaust Temp: 965°F

Airflow: 716,000 lbs/hr

Gas Turbine Specifications

Type: Heavy duty

Stages: Two

Configuration: Single shaft, 2 bearing

Operating Speed: Turbine 5100 rpm, Generator 3600 rpm

Trip speed (electrical): 5610 rpm

Rotor bucket material: First stage = IN738, Second stage = U-500 Stator nozzle material: First = FSX414, Second = N-155

Compressor

Type: Axial flow

Stages: 16

Inlet guide vanes: Fixed

Rotor blade material: 403

Stator vane material: 403

Bearings

Radial type (2): Elliptical

Thrust type (1): Tilt pad

Combustion

Type: Cannular reverse flow

Number of chambers:10

Materials: Liners and Transition Pieces = Hastelloy X

Igniters (quantity): 2

Flame detectors (quantity): 2

Natural Gas Fuel

Pressure required:

Maximum = 300 psig

Minimum = 250 psig

Fuel gas temperature (minimum): > 50°F of superheat

#2 Distillate

Pressure required: 25-70 psig, 1.5 to 35 gpm

Lubrication Oil

Configuration (turbine, gear & generator): Common supply

Oil type: Mineral oil

Initial charge: 1900 gallons

Reservoir capacity: 1700 gallons

Retention time : 5+ minutes

Bearing supply pressure: 25 psig

Bearing supply temperature (maximum): 120-130°F

Main oil pump: Positive displacement w/ Accessory gear Auxiliary oil pump: Centrifugal w/ AC motor Lube filters: Duplex, 5 u nom. Lube coolers: Simplex shell and tube, water cooled

Starting System – On Accessory Base

Configuration: Motor

Manufacturer: GE

Start time to base load: Normal 1.6 min, Fast 9.17 min

Clutch type: JAW

Controls (Included)

Manufacturer: Woodward

Type: Microprocessor based

Display: Color graphics (CRT)

Operator input: Keyboard and Mouse

Static Exciter (Included)

Manufacturer: Basler

Type: SSE-N 250-65KW

Further details:

The Turbine Generator set was refurbished in 1998 by Sulzer Hickham Inc.

The Turbine skid was stripped of all components. All paint and rust was abrasively cleaned and the skid repainted: All equipment on the skid was inspected and repaired to "like new" condition. The Gas Turbine thermal block was removed and the rotor removed. All internal elements were non- destructively tested and repaired or replaced as necessary to bring back to a "zero" time condition. Start motor, on board motors, pumps etc were inspected and repaired. All on skid wiring was replaced and new junction boxes installed. New weather paneling and doors were installed. Woodward gas and oil fuel system controls were installed.

The generator skid was stripped of all components. All paint and rust was abrasively cleaned and the skid repainted.

The generator stator was tested using IEEE guidelines. The generator field was tested using IEEE guidelines. Load gear and generator bearings were overhauled and installed.

New weather paneling and doors were installed.

Turbine Rotor and the generator field were dynamically balanced.

Price: $810,000.00 USD 'AS IS WHERE IS'

=================================================================================

7) 3 Steam Generator Units

Units 1 & 2

Steam generator capacity : 625,000 lb/hr (283 TPH)

SH temperature : 9000 F (4980 C)

Superheat outlet press : 850 psig (59.76 kg/cm2)

Excess air : 2-4%

Heating surface : waterwalls 39,387 ft2 (3660 m2), Economizer 10,200 ft2 (950 m2), 44,330 ft2 (4120 m2)

Front fired, single furnace, 3 rows of burners, pulv coal, manufacture by Babcock & Wilcox & Goldie McCullough

Unit 3

Steam generator capacity : 1,015,000 lb/hr (460 TPH)

SH temp : 10050 F (5565 C)

RH inlet temp : 6750 F (3730 C)

RH outlet temp : 10050 F (5565 C)

RH inlet press : 460 psig (32.3 kg/cm2)

Superheat outlet press : 1850 psig (130 kg/cm2)

Excess air : 2-4%

Heating surface : 60,330 ft2 (5600 m2)

Single furnace tangentially fired pulverized coal. Combustion Engineering supply

Further notice: Combustion Engineering Boiler, 1,015,000 lb/hr (460 TPH)

This Boiler will require asbestos removal and this asbestos is scheduled to be removed in later 2007 or early 2008.

At this time we do not have pricing for the Boiler however it is available for inspection any time.

Please advise whether you desire to inspect and we will make the necessary arrangements

Please advise as to your interest and make arrangements for inspection.....

Please come back to us if you need further information.

================================================================================

8) 21 MW Co-Generation Power Plant

HFO, 50 Hz, 600 rpm

Activated in September 2002.

Two (2) MAN B&W Mirrless Blackstone 16V430MB type Diesel Engines.

Diesel Characteristics;

Four (4) Stroke Cycle

Turbocharged Diesel driven Generator

Running with HFO #6

16 Cylinders – V type

Medium speed rates of 600 rpm

Steam production;

7 TPH (7 bar-170 degrees C) by using waste heat of exhaust gas temperature

Part of the Steam (1 TPH) has been used for internal requirements of the Power Plant

Remaining Steam (6 TPH) can be used for external steam requirements, eg, Steam Turbine

Electricity;

Nominal Power Rate: 21 MW

Internal Electricity consumption of the Power Plant : 0,550 MW

Total usable Energy Rate : 20.450 MW

Yearly Electricity Production Rate : 168.000.000 kWh/year (*)

Steam;

Nominal Steam Production Rate : 7 TPH

Internal Steam consumption of the Power Plant : 1 TPH

Total Steam Capacity : 6 TPH

Yearly Steam Production Rate : 56.000 TPY (*)

Hot Water;

Nominal Hot Water Production Rate : 1 TPH (steam equality)

Yearly Hot Water Production Rate : 8000 TPY (*)

(*) For minimum 8000 running hours per year

Price: $8,000,000.00 USD 'AS IS WHERE IS'.

=================================================================================

9) Two (2) units of SIEMENS Gas Turbine Plant

100 MW (ISO) each, 10.5 kV, 50 Hz

Siemens V94.2 Heavy-Duty Gas Turbines with all relevant auxiliaries

ON REQUEST for the two (2) units “as is where is”.

TECHNICAL DESCRIPTION / SPECIFICATION

Siemens Gas Turbine Plant for sale

General Information and Plant Description:

1. General Description

Two (2) complete Gas Turbine Power Plants

Each unit with a rated output of 100 MW at ISO conditions

10.5 KV, 50 Hz

Each consisting of Siemens V94.2 Heavy-Duty Gas Turbines with all relevant auxiliaries in excellent condition. Fully operable, ready for immediate delivery

Fuel : Currently on Liquid Fuel, but Gas Conversion Equipment available.

Each GT unit is of Single-Shaft, Single Casing design, equipped with 2 Silo-type Combustion Chambers, a 16-stage Compressor and a 4-stage Turbine.

An air-cooled Generator, rated at 125 MVA and generating at 10.5 kV is driven from the cold (Compressor) end of the GT unit.

GT1 & GT2 are currently installed with Siemens diffusion-type Burners for operation on Distillate-oil Liquid Fuel.

2. Main Equipment List

Equip’t	Description	Qty	Year	Make	Model	Capacity/Rating1
GT1	Gas Turbine	1	1982	Siemens	V94.2	100 MW @ 0.85 pf
GT1	Generator	1	1980	Siemens	TLRI 108/41	10.5 kV, 125 MVA
GT2	Gas Turbine	1	1982	Siemens	V94.2	100 MW @ 0.85 pf
GT2	Generator	1	1982	Siemens	TLRI 108/41	10.5 kV, 125 MVA
GT 1 & 2	Generator Step-Up T/F	2	1982	Siemens	-	10.5 to 66 kV, 120 MVA
	Unit T/F	2	1982	Siemens	-	10.5 kV to 6 kV
	Main Oil Pump	4	1980	Siemens	ET8020VL	27.77 l/s
	Secondary Bearing Pump	2	1980	Siemens	-	10.55 l/s
	Lubricating Oil Cooler	2	1980	Luwa	EK 43/26-4R	13.32 dm/s
	Fuel Oil Injection Pump	2	1980	Allweiler AG	SHF440 P46	750 l/min, 57.5 Bar
Common	Station T/F	2	1980	-	-	22 kV to 6 kV
	Auxiliary T/F	2		-	-	6 kV to 3.3 kV
	Auxiliary T/F	2		-	-	6 kV to 1400 V
	Auxiliary T/F	2		-	-	6 kV to 500 V
	Auxiliary T/F	2		-	-	6 kV to 380 V
	Auxiliary T/F	1		-	-	3.3 kV to 415 V
	Blackstart Diesel Generator	2	1981	JP Sauer & Sohn	WP13L100	2.9 MVA
	Blackstart Air Compressor	2	1999	Boge	SRH460	460 l/min, 35 BarG
	Mobile Air Compressor	1	1982	Fuji	EUV-15	9.9 kg/cm2, 317 l
Fire Fighting	Diesel Fire Pump	1	1980		-	1872 GPM
	Electric Fire Pump	1	1980		-	1872 GPM
	Hydrant Pump	2	1980		-	1200 GPM
	Diesel Fire Pump	1	1982		820162/1	680 m3/hr
	Electric Fire Pump	1	1982		810353/1	682 m3/hr
	Foam Tank	1	1986		-	17.5 Bar
	Water Storage Tank	1	1986		-	1100 m3

3. Overview of Operation & Maintenance

The Plant owner has consistently performed maintenance on the GT units in order to achieve consistently high levels of availability, generation efficiency, peaking capability and reliable start-up.

Major Overhauls have been carried out at intervals of 25.000 EOH.

Inspections on the GT units are typically performed at 18-month intervals and cover the following scope:

- General inspections of GT Thermal Block

- Renewal of Air Filter Elements

- Inspection & Renewal of Flame Tube Bricks (where required)

- Inspection & Repairs to Air-filter House and Exhaust Diffuser/Stack

The owner performed a Major Overhaul on GT2 in October 1992. Similarly, a Major Overhaul of PPGT1 was last performed in November 1998 with the following scope:

- Installation of new Flame Tubes complete with assembled Bricks

- Installation of new Flame Tube Plates

- Installation of new Inner Casing

- Installation of new Transition Rings

- Installation of new Stage 1 Compressor Rotor Blades

- Repair of Mixing Chambers

- Overhaul of Generator Alternator

Summary of Service Hours & Number of Start-Ups

GT Unit	Total Service Hours[1]	EOH Hours³	TTL No of Starts³	Number of Start-Ups
GT Unit	Total Service Hours[1]	EOH Hours³	TTL No of Starts³	FY97/98	FY98/99	FY99/00	FY00/01	FY01/02	FY02/03	FY03/04
GT1	11,269	37,603	2,385	6	9	83	109	106	93	72
GT2	14,902	46,331	2,598	69	57	65	104	88	81	69

=================================================================================

10) 200 MW Diesel Power Generation Plant
The plant consists of 2 stations, one station has a capacity of 34 MW and consists of 4 diesel generators, of which three is Japanese made with diesel engine Model 16PC2-6 combined with Japanese made generator NTAKL giving an output of 8,500 kW each. The second station has 20 units of Sulzer diesel engines packaged with Alsthom generators giving a total capacity of 200 MW. The plant is considering to sell part or whole of the plant to have the land for other purposes.

1. The Sulzer Diesel Engines

Model
16ZAV40S

Manufacturer
Sulzer, France

Rated Ouput
10,560kW (4 sets), 11,520kW (16 sets)

No. of Cylinders
16

Cylinder Diameter
400

Stroke Distance
560

Speed
500 rpm

Fuel Oil Consumption
205g/kWh

Lub Oil Consumption
1g/kWh

Maximum Continuous Power
10,560kW (4 sets), 11,520kW (16 sets)

Weight of Engine
132 tons

2. The Generator

Model
RP256-90B (4 sets)
RP256-100 (16 sets)

Manufacturer
Alsthom, France
Alsthom, France

Designed Capacity
10,238kW
11,186kW

Output Voltage
10.5kV
10.5kV

Designed Current
704A
770A

Designed Speed
500 rpm
500 rpm

Designed Frequency
50Hz
50Hz

Power Factor
0.8 lagging
0.8 lagging

Insulation
Class F
Class F

Weight of Generator
43.55 tons
43.55 tons

Price: $22,500,000.00 USD, FOB Far-East Port. REDUCED PRICE

=================================================================================

11) 2 TYPE S.E.M.T. - PIELSTICK 18 PC3V DIESEL - GENERATOR SETS

Spares Package Included

Engine Power 12,6 MW each unit

Condition Mint -- Total running hours 55,000

Used as a back up unit to Grid and to deliver energy to heating.

Manufacturer: Lindholmen Göteborg/Pielstick

Manufactured: 1974 and installed 1975-76

2 complete sets of diesel-generators incl. spareparts.

Engines

4-stroke, 18 cylinders, V-built turbocharged medium speed diesel type S.E.M.T. - Pielstick 18 PC3V, manufactured by Lindholmen Motor in Göteborg.

Engine performance at 20C cooling water temperature, air 27C and 750 mm Hg

pressure:

Max output 12580 kW