Monday, 26 February 2007

Dear Sir
subject to prior sale we can offer today:

1. )  14 Cummins QSV 1.75MW engine generators
New equipment with full standard factory warranty
60 HZ, 13.8kV voltage
Located in USA
Available immediately
We are asking US$ 685,000 per each.

===========================================================================


2.)   Stork Wartsila Genset (back-up unit, never used!)
type : 9sw280

Serial Number : 80192
Manufactured : 1993

Condition : 30 hours only
Output : 2750 KW @ 1000 RPM
Voltage : 6300

Documentation : Complete
Price : US$ 784,000 Only


===========================================================================

 

3.)  Siemens Alternator (Brand new!)
Type : IFC I/211/6hc62/z
Serial Number : GG93.000111/93036
Manufactured : 1993
Capacity : 3500 kVA @ 1000 RPM
Voltage : 6300
PF : 0.8
Condition : Brand New
Price : US$ 116,500 Only

 

===========================================================================


4) 2 x 50 MVA POWER STATION
A unique opportunity has arisen to purchase the equipment in a 100 MVA Power Station,

which was installed in 1974/75 BUT HAS NEVER OPERATED COMMERCIALLY.
The plant comprises 2 x 50 MVA Brown Boveri condensing steam turbines and 2 x 180t/h Sulzer

high pressure water tube boilers, which were designed to burn heavy fuel oil and blast furnace gas.
The power plant was originally built to utilise blast furnace gas at an integrated steelworks.

During commissioning of the new power station, the steelworks decided to close the blast furnace plant,

which made the power generation equipment redundant.

Since that time, the power plant has stood idle and the equipment is now for sale.
The owner is willing to sell all the following equipment within the power station

as a single lot, on the basis of "as is, where is".

Number of Units:                             2 steam turbines 2 boilers
Location:                                         Europe
Year Commissioned:                       1974/75
Service Hours:                                 Plant has never operated commercially
Condition:                                       Plant unused commercially
Status:                                             Installed on foundations within Power Station building

DOCUMENTATION
Operation and Maintenance Manuals available.
STEAM TURBINES   
Number:    2
Manufacturer:  BBC-Brown Boveri

Type:  Condensing steam turbine
Rated Power:  50,000 KVA @ 0.8 P.F. (40MW)
Speed:   3000 RPM
Inlet Pressure:   31 barg
Inlet Temperature:   400C

Inlet Flow @ MCR: 180t/h

Condenser:  Seawater Cooled 

ALTERNATORS
Manufacturer:                                                
BBC
Capacity:                                                          50,000 kVA
Power Factor:                                                 0.80
Active Power:                                                 40,000kW
Rated Voltage:                                                10.5kV
Frequency:                                                      50 HZ
Speed:                                                              3000 RPM
BOILERS
Number:                                                           Two
Manufacturer:                                                 Sulzer Fuels:
- HFO or mixed Blast Furnace Gas / HFO Steam Conditions:
Design Pressure                                          39.2 Barg
Pressure at Super Heater Outlet                 31.4 Barg
Temperature at Super Heater Outlet           410 C Output:
- Flow at MCR with 100% HFO or
80% BFG and 20% HFO                              190t/h Efficiency:
- 100% HFO at MCR                                           92%
- 80% BFG / 20% HFO at MCR                          86.5%
BALANCE OF PLANT
BOP available to purchaser

Price: wait for a bid

===========================================================================

 

5.)   Two (2) Frame 6 units of Gas Turbines

French made Alsthom PG6461B combined cycle

5135 rpm, Crude Oil and Light Diesel Fuel

Rated Power Output at ISO condition : 34.55 MW

Combined Cycle Output Power : 34.10 MW

Turbine Efficiency : 30.56% 

 

Gas Turbine Generator

Model : T190-240

Output Voltage : 11 KV

Rated Current : 2381 A

Closed Circulation Air Cooler with Water Cooler

Insulation : Class F

 

Brushless Exciter

Model : TKJ70-10

Rated Power : 123.7 kW

Rated Current : 507 A

Generator Control consist of manual & automatic operation

 

Steam Turbine

Make : Alsthom Rateau Etablissment

Model : TC633FV140

3000 rpm

16 stages diffusion

Rated in flow : 121.9 TPH

Rated Pressure : 36bar

Rated Pressure at Cooler : 0.068bar

Generator model : T190-240

Rated Output : 34.95 MW

Installed in April, 1988

Closed air cooled Brushless Exciter

 

(2) x Waste Heat Boilers

Make : French Alsthom Setn

Vertical 2 pressure forced Circulating Boiler

Rated Steam Generation : 60.95 TPH

Steam Pressure : 39.5 bar

Overheat Release : 38 bar

Overheat Steam temperature : 487 degrees C

Gas Turbine Exhaust temperature : 528 degrees C

Boiler Exhaust temperature : 156 degrees C

Made in 1987, Installed in April, 1988 

 

3 sets of Alpha Laval Crude Oil 2 stage Centrifugal self-cleaning Treatment

Model : OSB 35-02-566 EX40

Rated Treatment Capacity : 10 cbm/hr (each set)

 

Auxillary Fuel Treatment System, including:

Small Boiler Water Heater

Emulsifier Additive System

Water Pressure Booster

Air Compressor

Waste Water Treatment System

Crude Oil Pumping System

Diesel Pumping System

Fire Fighting System

 

Water Treatment System:

French made Sanilo Brand

Treatment capacity : 10 TPH, max 15 TPH

2 sets of De-ionizer with 2 sets of 100 cbm demineralized Water Tank

Controlled by TSX-47 automatic Control

Boiler Water Treatment by phosphorus salt

On-line Analysis Ammonia Treatment

 

Main Transformer

Alsthom made

Model : TTH

Serial no : 51-134/001/002/003

3 phase, 50 Hz

Connection : YNd11

Rated Capacity : 50000 kVA

Rated Voltage : 121 -2x5%/11 kV

Rated Current : 239/2625 A

Max. Operating Voltage : 123/17.5 kV

Oil filled 2 Coils

Natural Cooling

5 sets of Voltage Adjustment Connections

 

Control System

Alsthom made 8088 CPU Control System

First stage full automatic Management Control for auto start-up and shut down of System with Control

Second stage sub-system Control including:

Boiler Control (FRE001AR)

Boiler Safety (FSC001AR)

Steam Generator Control (2GRE001AR)

Steam Generator Safety (3GRE001AR)

Logic Sample (9KCZ001AR)

Module Sample (9KBS001AR)

Communication (3KCZ001AR)

Third stage manual Control (Component Control, Direct Control at Valves and Electric System)

Boiler Control System using PEM-51M, GEN-51, Network

Water Treatment and Ash Blower using PLC Control

 

Gas Turbine Controls : Mark 4 

 

Price : 10.75 Million US$ as is where is, Europe

 

===========================================================================

 

6)  LM 2500 – Complete CCGT Gas Turbine Power Plant

Gas Turbine Model : LM 2500 PE

Power Turbine Type : GE Six Pack

Manufacturer : Stewart & Stevenson

Commercial Operation Date : March 1991

Total Hours since New : 55056 Fired Hours, 4340 Starts

Time since Last Hot Section Overhaul : 683 Hours (HS carried out by MTU Maintenance GmbH)

ISO Rating : : 23.6 MW, 27.765 MVA   

Heat Rate : 7085 Btu/hpr, 10,020 kJ/kWh                                   

Control System Manufacturer : GE Micronet (installed January 2005)

Generator Manufacturer : Brush Electrical Machines Ltd, USA

Generator Type : Brushless Excitation, 11 kV, 50 Hz

Auxiliary Transformer : 11 kV / 400 V, 1000 kVA, 3 Phase

Fuel Type : Dual Fuel (Diesel and Gas)

Year of Manufacture : 1991

Starting System : Hydraulic

Water Injection : Installed water injection NOx control system

Current Status : Unit is still in operation so test runs can be carried out.

Misc. : The LM 2500 is in combined cycle mode with the HRSG producing steam for a steam turbine.

The steam turbine provides and additional 6.8 MW for each unit.

Generator tests were carried out at 3600 RPM, 13800V, 60 Hz and

can be modified back to 60 Hz operation if required.

The complete Power Plant is available to be sold including

all equipment which is required for electrical generation, from Air Inlet Filters to Transformers.

Also available is the HRSG and Water Injection Equipment.

Lube oil consumption : Low. Only 2 to 3 barrel for 1 year.(55 gal/barrel).

Fuel Consumption (Diesel) : 9 tons/hr for the diesel.(10300kcal/kg)

Fuel Consumption (Gas) : 12000 m3/hr for the NG. (8789 kcal/m3)

Mass Flow of Steam : 30 to 35 tonnes per hour

 

Price : 4.6 US$ Million, as is where is, Far-East

 

===========================================================================

 

7.) Gas Turbine, LM2500

Complete unit to standard LM2500 OEM Specification

20.5 MW Output at 50 Hz, 11.5 kV, under ISO

From intake to exhaust with new state-of-the-art control system, installed, test run at a certified test cell,

with upgraded hot gas path section (coated) for higher first stage gas temperature (upgraded to LM2500PE output),

available for inspection and receipt within three to four (3-4) months of shop start date

 

Options:

Twin (2) fuel capability (by fuel nozzle exchange by hand) at additional cost.

Dual fuel (allowing fuel type change during operation), water injection, DI/DM water system,

stainless steel intake and exhaust upgrades, GE Mark V control upgrades, heat recovery

steam generator (HRSG), HRSG Duct burner upgrade, SCR, Co-generation or combined-cycle

upgrades with or without steam turbine-generator, but with full systems with condenser and cooling tower

are not included, but can be quoted later, as desired.

-         A standard industry one-year / 8,000 operating hours / 500 cycles, whichever comes first,

warranty from installation/commissioning date is included with the purchase price of this unit,

if installed/commissioned within six (6) months of buyer receipt. 

Any item(s) not specifically priced/covered in this quotation will can be added

and priced as an extra item subject to PGSI time & material rates.

-         Again, the unit offered is new/never used and will be configured

to 50 Hz operation under liquid fuel with 11.5 kV output voltage.

-         The original generator was manufactured by Brush under GE specification,

but was de-rated for 18.75 MW at 1000 ft elevation with 59 degree F air temperature at 95% humidity.

-         We will rewind, reconfigure and/or replace the existing generator, as needed,

to bring this unit up to standard OEM model LM2500PE, 20.5 MW specification

-         This unit is presently stored in the UAE.

 

Price : 6.6 Million US$ as is where is, UAE

 

===========================================================================

 

8.)  Two (2) units of Gas Turbine, LM2500 PE

22.5 MW, 13.8 kV, 60 Hz, SKID MOUNTED Gas Turbine Generator Set

- Rating: : 22.719 MW

- Fuel: : Natural Gas / Distillate Fuel (D2) to GE specifications

- Cycle: : 50/60 Hz, PLC controlled.

- Guaranteed kW Output at the Generator Terminal and corresponding fuel consumption rate for a set of

site conditions mutually agreed upon by both parties.

 

Each unit package has:

One (1) LM2500 PE Gas Turbine Engine equipped with Inlet Bellmouth and Screen

One (1) GE Generator, 26471 kVA ISO rated, 13.8 kV, 60 Hz

Air cooled with GE Excitation System and Voltage Regulator.

Neutral and Line Cubicles with CTs, Surge Protectors and Lightning Arrestors.

GE Mark V Unit control Panel for indoor mounting in a controlled environment,

including microprocessor fuel management and sequencing system, generator metering,

vibration monitoring, CRT, with annunciation of alarms, and shutdowns.

 

Scope of Supply

- LM2500 PE Gas Turbine Engine equipped with inlet bell mouth and screen.

- Liquid fuel system, complete and self-contained on the unit, with connection

on the baseplate for customer of filtered distillate fuel at 30 /- 10 psig, up to 40 GPM (maximum),

fuel must conform to GE specification MID-LD-0000-2

- Natural Gas fuel system, with connection on the baseplate for customer's filtered,

regulated fuel supply at 375 psig /- 20 psig at a rate of 12,000 pph (200 mmbtu/hr or 6 mscf/day to

GE fuel specification MID-LD-0000-1 (Requires field installation of gas metering and block valves, not Included).

- GE Generator, 26,471 kVA ISO rated, 13.8 kV, 60 Hz (11 kV @ 50 Hz), 3600 RPM,

air cooled with GE excitation system and voltage regulator. Neutral and line cubicles

with CTs, surge protectors and lightning arrestors.

- I-beam baseplates for turbine, generator and unit mounted accessories.

- Acoustic enclosure for gas turbine and generator. Ventilation systems and AC internal lighting.

- Air inlet filtration system for both gas turbine and generator

- Electro-hydraulic start system.

- One new exhaust stack

- New GT Controls (Woodward Atlas based)

- Separate oil systems for gas turbine and generator, including duplex filters, duplex water/oil coolers

 

Price, Payment and other Conditions:

- By confirmed, irrevocable, divisible and transferable letter of credit issued by agreed United States

major bank or European Affiliate of a United States major bank for the full contract amount.   .

- Turnkey Installation and Commissioning available

- Equipment will be crated and prepared for shipment within thirty to sixty (30-60) days

after receipt of down payment. However, inspection, acceptance and final payment must be

received/confirmed within thirty (30) days of down payment in order for the units to be prepared and released for shipment.

 

Both LM2500PE dual fuel CTG units, in refurbished condition, are

offered at 6.85 US$ Million as is where is per unit.

A standard industry one-year / 8,000 operating hours / 500 cycles, whichever comes first,

warranty from installation/commissioning date is included with the purchase price offered,

 if installed/commissioned within six (6) months of receipt.

Any item(s) not specifically priced/covered in this quotation will can be added

and priced as an extra item subject  time & material rates.

 

This offer is subject to shop loading, prior sale and/or unit availability at the time of order confirmation. 

No taxes, fees, duties, special boxing, special handling, demurrage, expediting charges,

 transport expenses, inspection fees, expediting or insurance costs, etc. are included in this offer. 

This offer is valid for ten (10) business days from issue. 

Full payment will be required prior to any equipment, conveyance or title transfer. 

 

Feel free to call on me at your convenience should you have any questions or desire further assistance in this matter.

These units are in the USA.

 

Price: POA

 

===========================================================================

 

9.) 2 unit Genset CAT 3516B for immediate sale (Zero Hours Meters) as follows : 

Year 2000/2001, Brand New still in the Cargo Containers Boxes,  Zero Hours Meters

Capacity 2000 kW (2500 kVA), 60 Hz, 3 Phase, 6 Wire, 480 Voltage  3007 Amphere, 1800 rpm

Generator Model SR 4B

Serial No 1HH00615, Serial No. 6TN81329

AR No. 1169866

Max. Alt 912 M

Power 2145 Cap

RPM 1800 max

ECM software 1801936

injector 1504956

Turbo BT 1989914

Price: 380,000 US$ per unit FOB shipping port,

 

===========================================================================

 

10.) 2 unit x CAT 3516 TAES coupled to CAT SR4

1825 kVA / 1460 kW

Power Factor : 0.8

380 / 220 V

3 phase, 50 Hz, 1500 rpm

New in 1994

500 hours used

Synchronizing Panel included

Condition : Very Excellent.

Price : 300,000 US$ per unit FOB Far-East port

 

===========================================================================

 

11.) Six (6) units of Gas Turbine Generators

Make : Stewart & Stevenson

Model : 2416G-2000

2000 kW (2500 kVA)

11 kV, 50 Hz, 1000 rpm

3 Phase

Connected : Wye

Insulation : Class F, VPI

Enclosure : IP,22

Voltage Regulator : Basler

 

< Short Description >

- Superior Model 2416 Turbocharged, 4-stroke cycle, Natural Gas Engine operating at 1000 rpm:

- Accessory Equipment

- Engine Control Panel/Gauge Panels

- Engine mounted Detectors, Switches

- A common base for the Engine, Accessory rack

- Painting – Olive Green 3 stage for corrosive environment

- Switchgear: Freestanding Six (6) Section Generator Set Metal Clad Medium Voltage Switchgear to provide

for Power export and Utility paralleling, using four (4) 2000 kW, 11 kV, 3 phase, 50 Hz GENSETS.

Switchgear to allow for remote auto start, remote stop, remote diagnostic communication, and auto synch with utility 

Price: 6 Million US$ for the Lot!

 

===========================================================================

 

12.)  Four (4) units of 125 MW Westinghouse Dual Fuel Turbines

125 MW Westinghouse W-701D

Dual Fuel : Gas & Light Oil

Year: 1995 (installed in 1998 )

Generator : 15 kV, 50 Hz, 3000 rpm

Cooling : Hydrogen,

Controls : monitoring from remote or local panel.

Heat Rate : 10,750 BTU/KWe

 

#1

#2

#3

#4

Total Hours

19004

26505

36400

41450

Hours since last Overhaul

7484

4341

7527

9116

 

Major Gas Turbine Items

Type : Open Cycle, Single Shaft

Model : (TG-50-D)  W-701D

Speed : 3000 RPM

Capacity : 125 MW @ ISO

Control System : MASTER 900

Gas Turbine (Air Compressor)

    Axial Flow Reaction Type

    Compression Ratio : 14/1

    Stages : 19

Inlet Vanes : Variable

Combustors

    Type : CANNULAR

    Quantity : 18

    Ignition Method : Electric Spark Method X 2

Gas Turbine (Axial Flow Reaction Type), Quantity : 4

Forced Air Cooled Blades : Stationary Blade 1 & 2 Stages, Moving Blades 1 & 2 Stages

NOx Control : Water Injection to 25 VPPM

Emergency Governor : Mechanical (Ejection Type) and Electrical

Dual fuel (Gas & Light Oil)

Generator Type : Cylindrical Rotating Field

140,000 kVA, 15 kV, 50 Hz

Poles : 2

Cooling : Hydrogen

Insulation : Class F

Exciter : ABB Static

Starting Method : Three Phase Induction Motor

Starting Motor Size : 1450 kW

Synchronous Speed : 1500 RPM

Start Time : within 57 minutes

Controls : Local & Monitoring from Remote or Local Panel

  

(4) x Westinghouse Licensee MODEL W-701-D, 125 MW @ 50 Hz

Dual fuel Gas Turbine each of which is characterized by the following Equipment

and accessories except where mentioned otherwise.

New in 1998::

Offered out with  factory warranty if required

Rating : 125  MW each @ ISO

15 kV Generator Terminal Voltage

  

1. Turbine and Turbine Compartment

Base Mounted, Simple Cycle, Single Shaft, W-701-D Gas Turbine Compartment consisting of:

Multistage, Axial Flow, Corrosion Protected Compressor

Eighteen (18 ) Chamber Combustion System

3-stage Turbine with coated first stage Buckets, Modulating Inlet Guide Vanes

On base Gas Fuel System and Liquid Fuel System suitable for distillate

Dual Ignition System.

Dual Compartment AC Vent Fans (Negative, common for GT & ACC compartment)

Vibration Sensors, Seismic type, for protection

Thermocouples for measuring critical Turbine and load temperatures, including bearing drains

Inlet and exhaust Plenums

Load Coupling (Solid), with Coupling Guard & Hardware

GT Enclosure (On-base) limiting near field noise level to 93 dBA

Oil filled Accessory Coupling

Fire detection and protection, for on base Equipment

* On-base Piping as per ANSI 1331.3

* Base mounted Terminal Boxes and interconnecting wiring in rigid metal conduits

  

2. Accessory Systems & Compartments

Accessory Systems & Compartments include:

Accessory Gear, Heavy-duty, Multi-shaft with Oil filled Accessory Coupling to Turbine Shell

Starting System, 1450 kW (from external source)

Electric Motor

Torque Converter

Rotor Turning Device

Fuel Oil Pump

Lubricating & Hydraulic Oil System

Shaft driven main lubricating Oil & hydraulic Oil Pumps

Full flow AC Motor driven Emergency Pump

Partial flow AC Motor driven Emergency Pump

Full flow AC Motor driven Auxiliary Hydraulic Pump

Dual Filters and Transfer Valve for lubricating Oil & hydraulic Oil Systems

100% Lube Oil in Water Heat Exchangers (fin fan style)

Piping in accordance with ANSI BI 1. 3 and applicable ASME welding requirements

Fire Detection and C02 Protection System for on base Equipment

Electrical Components

All Motors, except Starting Motor, feature:

TEFC Motors, Terminal Boxes, Conduit & Wiring to meet NCC Class 1, Group-D

Dual Compartment Vent Fans (negative ventilation common for ACC & OT compartments)

Full weather protected Enclosure for outdoor installation

  

3. Inlet Air System (Up & Over Orientation)

Filter compartment with:

Support Structure

Inlet Ducting

Access Hatch

Instrumentation

Inlet silencing in ducting

Inlet Bellow

Transition piece from Inlet Dusting to Inlet Plenum

Structural Supports

 

4. Exhaust System (Top Exhaust)

Transition pieces and stack of 15 meters height, including Silencer

 

5. Load Coupling Compartment

Rigid non-lubricating Load Coupling

Fabricated Load Coupling Guard

Full weather protected Enclosure

 

6. Control Cabinet

Turbine Control Panel

Motor Control Center

125 V DC Battery (Lead maintenance free) Charger and DCDB

 

7. Aux. Compartments & Turbine Fire Detection and Protection System (CO2)

8. Portable Lube Oil Purifier

9. Foundation Hardware

10. Special Tools and Tackle (One Set)

  

Scope of Supply for each Generator:

-          Generator (Open Circuit air cooled) with Stator, Rotor, Built-in RTD'S, Bearings, Foundation Frame and Enclosure Generator with Terminals at top

-          Brushless Excitation System including main Exciter

-          Ventilation System for Generator with Ducting & Self-cleaning Filters

-          Phase isolated Bus-ducts with Aluminum Conductor and Aluminum Enclosure with CT's

-          PT's, LA & SP Cubicles (10 meters on phase side & 6 meters on neutral side)

-          Neutral Grounding Transformer with Loading Resistor

-          Conventional Generator Control Panels and Microprocessor based Relay Panels and duplication of Controls in the Central Control Room

-          Inter-connecting Control Cables for connection between Generator Bus Duct and C/R Panels

-          C02 Fire Protection for Generator

-          Automatic Voltage Regulator (Digital type) 

 

Price: $16.9 M USD per unit (including removal from their installation).

 

===========================================================================

 

13.)  (2) x Sulzer 16ZAVA40S units, 60 Hz operation and HFO.
Specification of Sulzer 16ZA40S Diesel Generator Engine:

Manufacturer : New Sulzer Diesel France

Engine Type : 16ZAV40S

Cylinder Bore/Stroke : 400/560 mm

Speed : 600 rpm

BMP : 24.56 bar at MCR

Number of Strokes : 4 (four)

Number of Cylinders : 16

Nominal Power of Diesel Engine : 13750 kW  (720 kW/cyl) at MCR

Rotation : Clockwise

 

Engine Equipment:

- Two Turbochargers, BBC VTR 454-21                       

- Air Cooler, GEA, Single Stage, Mounted on Engine

- Flywheel with Barring Rim and necessary Fitted Bolts, without Guard

- Vibration Damper

- Turning Gear with Starting Interlock Valve, Electric Motor and Control Gear

- Indicator Cock on each Cylinder

- Starting Valve for each Cylinder

- Safety Valve in each Cylinder Head

- Starting Air Piping including Safety Valve, Spark Arrester and Non-return Valve

- Exhaust Gas Piping protected with Insulating Panels

- Insulated Fuel Supply and Return Pipes with Connections for Steam Heating

- High Pressure Fuel Injection Pipes with Double-wall Pipes

- Piping on Engine with necessary Mating Flanges, Joints and Bolts

- Coupling Bolts between Engine and Generator

- Foundation Rails with Foundation Bolts

- Speed Governor, ABB, DEGO 2 ASAC 70

- Oil Mist Detector, Shaller

 

Generator:

Manufacturer : GEC Alsthom

Type:: RP 256-100

Apparent Power : 16800 kVA

Rated Voltage : 12,600 V

Power Factor : 0.8

Speed : 600 rpm

Frequency : 60 Hz

Protection : IP 23 

these units are ready for inspection.


Price : 1.4 Million US$  per unit as is where is,  2.8 Million US$ for the two (2) units

 

===========================================================================

 

14.)  (2) x Diesel Engines:

Make : MAN B&W AG, Germany

Type : 14V40/45

Rated Output : 8.47 MW @ 600 RPM

Mean Effective Pressure : 21.4 Bar

(4) x Turbochargers, MAN NA40/TM8128

Governor : Woodward UG40

First Commissioned in 1993 and Overhauled in 2005

In 2005, all Engines were already Overhauled in accordance with MAN services / technical requirements / instructions.

Total 15980 / 16120 hours used until Overhaul, 4650 / 4670 hours used after last Overhaul in 2005

 

(2) x Alternators:

Make : SIEMENS

3-phase Synchronous / Brushless Excitation

Type : 1DK-5037-3DE05-Z

Rated Capacity : 10270 kVA

Speed : 600 RPM

Power Factor : 0.8

Rated Voltage / Frequency : 10.5 kV / 50 Hz

F Class Insulation 

Station Service Transformer : Chinese made, 1600 kVA, 50 Hz 

-         Below-mentioned Scope of Supply is subject to Final Re-confirmation of the End-user during Inspection

-         All Sub-station Equipment / Transformers are not included in this Scope of Supply

-         Please see attached ‘Mechanical Part’ and ‘Electrical Part’

-         Photos will follow separately 

 

<< Mechanical Part >>

(2) x Fuel Oil Supply Systems:

Heavy Oil Daily Tank, 5 m3

Diesel Oil Daily Tank, 5 m3

Fuel Oil Mixing Tank, 300 liters

Fuel Sludge Tank, 250 liters

Fuel Oil Pre-heater

Fuel Viscocity Transducer / Measuring Devices

Fuel Oil Self-flushing Filter, Boll & Kirch, Type : 6.24.4DN40

Fuel Oil Separator, Alfa-Laval, Type : FOPZ609T-FD-24-50

Oil Feed Pump

Oil Heater

Supply Pump

 

(2) x Lub. OIl Supply Systems:

Lub. Oil Storage Tank, 15000 liters

Lub. Oil Circulating Tank, 12000 liters

Cylinder Jacker Lub. Oil Tank, 1000 liters

Sludge Lub. Oil Tank, 1000 liters

Plate Heat Exchanger, GEA

Lub. OIl Self-flushing Filter, Boll & Kirch, Type : 6.61 DN200

Lub. Oil Duplex Filter, Boll & Kirch, Type : 2.05.5.340.750 DN150

Lub. Oil Separator, Alfa-Laval, Type : LOPX710 SFD-34-50

Cylinder Jacker Lub. Oil Separator, Boll & Kirch, Type : 1.03.2.195.250 DN65

Pumps, Motor and relevant Devices

 

(2) x Cooling System:

Cooling Tower & Raw Water Pump

Plate Heat Exchanger, GEA, VT402

Pumps, Motor and relevant Devices

 

(2) x Water Supply Systems:

Booster

Treatment & Dosing Pump (Dosing Tank)

 

(2) x Compress - Air Systems:

Air Compressor

Air Receiver

De-compressor

 

(2) x Exhaust gas Systems:

Exhaust gas Boiler

    Capacity : 1400 kg/h

    Pressure : 13 bar

    Steam Temperature : max. 1700 degrees C

Relevant Pump & Devices

  

<< Electrical Part >>

(2) x Three-Phase Synchronous Generator

Type : IDK5037-3DE05-Z

Rated Capacity : 10270 kVA

Rated Volatge : 10.5 kV

Frequency : 50 Hz

Power Factor : 0.8

Stator Current : 565A

Rated Rotation Speed : 600

Excitation Mode : Brushless

Connection : Y

Exciter Type : RGM240/15

 

(2) x 10 kV Switchgear Cabinet & Starpoint Earthing Equipment

Main Outgoing Feeder, Bus-coupler, Siemens, 3AF 1762-3

Geberator Cabinet & Station Service Transformer Cabinet, Siemens, 3AF 1766-3

PT Cabinet (including Bus Measure & Overvoltage Depressor, Siemens, 3CG 4053/5/1993/3158182

 

(2) x Low-voltage Distribution Panels

Switchgear for 380 V Station Service Transformer, Siemens, S05 S13 K02, VDE 0660(P-2), BS 4752/IEC 947-2, Type : 3WNI

Distribution Panel for 380 V

Distribution Panel for Engine auxiliaries

Distribution Panel for Common auxiliaries

 

(2) x Control, Measuring & Protection Panel

Used for Main Outgoing Feeder, Bus-coupler, Generator, Station Service Transformers & Local Outgoing Feeder etc...

The Alarm Signals are processed by SIEMENS Programmable Controller

 

(2) x Engine Control & Monitoring System

The Operating situation is monitored by SIEMENS Programmable Controller

 

(2) x DC 110 V & 24 V Equipment

The DC Equipment consistes of total 24 x 6 V batteries, Charger and Distribution Panels

 

PRICE - FOB FAR-EAST PORT: 3.8 Million USD.

 

===========================================================================

 

15.) 20 MW, Power Plant, Bunker-C Oil, 1978
(2) x 10 MW, 6.6 kV, 60 Hz, 3600 RPM
Built in 1978 by Fuji Electric Co., Ltd
Now Under Power in Far-East Plant and can be seen in Running (for min. Power Cost)
Will be shut down in Oct. 2006 and available for sale since the Customer purchased New Larger Plant
Estimated Total Weight of the Plant : around 4000 Ton   
Major Description of the Plant
Steam Turbine
Manufacturer : Fuji Electric Co., Ltd., Japan
Type : One Casing Extracting Condensing Type
Rated Output : 10 MW
Speed : 3600 RPM
Inlet Steam Press : 61 kg/cm2 abs
Inlet Steam Temp. : 482 degrees C
Exit Steam Press (No. 1/2/3) : 16.2 / 3.95 / 0.90 kg/cm2 abs
Condenser Press : 0.121
AC Generator
Type : PFT 450 / 45-2
Output : 12,500 kVA
Voltage : 6.6 kV
Current : 1094 A
Rating : Continuous
Speed : 3600 rpm
Phase : 3
Frequency : 60 Hz
Poles : 2
Insul Class : B
Ex. Voltage : 100 V
Temp Raise (Armature) : 80 degrees
Ex. Current : 425 A
Temp Rise (Fielde) : 90 degrees
Boiler
Manufacturer : Mitsuibishi  Hyundai (Japan/Korea)
Max Cont Rating : 50 TPH
Type : VU-60
Max. Press : 70 kg / cm2g
Steam Temp. : 485 degrees C
Fuel : Bunker-C Oil
Efficiency : 87%
Price Indication:
Plant : 7.3 Million US$ as is where is. (REDUCED PRICE!!!)
Dismantling Cost : about 1.5 Million US$ around 3 months required
Also available (at Buyers cost): Supervision of Re-Installation (Engineering & Operatoration....), Know-how transfer etc.....
Pictures and further details available on request.

 

===========================================================================

 

16.) 44 MW MAN Power Plant, HFO, 1991/1992
(4) x 10.89 MW, 11 kV, 50 Hz, 600 RPM
(4) x Diesel Engines:
MAN B&W AG, 18V 40/ 45
Rated Output : 10.89 MW @ 600 RPM
(4) x Alternators:
SIEMENS, 1DK-5037-3DE05-E
Rated Capacity : 13200 kVA
Rated Voltage / Frequency : 11 kV / 50 Hz
3-phase Synchronous / Brushless Excitation
(2) x Step-up Transformer, 100/110 kV
Make : <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />Fuji Electric, Japan
Capacity : 25 kVA
Includes:
Two (2) units of Transformer (each unit includes 2 pieces, total 4 pieces)
    Rated Capacity : 20 MVA
    Natural Wind-Cooling : 20 MVA / Forced Wind-Cooling : 25 MVA
    Rated Voltage of H.V side : 115 /- 8 x 1.25% kV
    Rated Current of L.V : 1050 / 1320 A
    Wiring Mode : Yo �–� Y-11
    Insulation : SF6 / C-GIS
One (1) unit of Receiver Transformer with all relevant Control, Measuring, Protection Panels
Total Price : 5.9 Million US$ (REDUCED PRICE!!!)

- Above quoted Price is FOB Far-East Port, which already included Dismantling, Transport and the relevant handling Charges with Export Taxes.
- Additional Ocean Freight and Insurance Cost to the Buyer's destination will be extra at Buyer's account
Payment Terms:
- 40% Down-pay by T/T within 14 days count from the date of Contract sign and confirmed order
- Balance (60%) by Confirmed & Irrevocable L/C at sight within 7 days count from the date of Contract sign and Receipt of Down-payment
- All relevant Banking Charges will be at Buyer's account
- Please note that all Payment will not be refunded IF order cancelled by the Buyer
Delivery Time:
- Approx. within 8-16 weks or earlier count from the date of Contract sign and also count from the date

of Confirmation of the Dowpayment receipt, subject to final re-confirmation
Remarks:
- All Equipment are in ver good condition and are still installed on site

 

===========================================================================

 

17.) Two (2) units of 120 MW Siemens Gas Turbine Plant

Two (2) complete Gas Turbine Power Plants

Each consisting of Siemens V94.2 heavy-duty Gas Turbines with all relevant auxiliaries in excellent condition

10.5 KV, 50 Hz

Fuel : Currently on Liquid Fuel, but Gas Conversion Equipment available.

Two (2) complete Gas Turbine Power Plants each consisting of two (2) Siemens Gas Turbines and

all relevant auxiliaries in excellent condition, fully operable, ready for immediate delivery.


Description of  Gas Turbine Generators

GT units GT1 & GT2 are Siemens V94.2 heavy-duty Gas Turbines.

Each with a rated output of 120 MW at ISO conditions.

Each GT unit is of Single-Shaft, Single Casing design, equipped with 2 Silo-type Combustion Chambers,

a 16-stage Compressor and a 4-stage Turbine.

An air-cooled Generator, rated at 125 MVA and generating at 10.5 kV is driven from the cold (Compressor) end of the GT unit.

GT1 & GT2 are currently installed with Siemens diffusion-type Burners for operation on Distillate-oil Liquid Fuel.   

 

Main Equipment List

Equipment

Description

Qty

Year

Make

Model

Capacity/Rating1

GT1

Gas Turbine

1

1982

Siemens

V94.2

120 MW

GT2

Gas Turbine

1

1982

Siemens

V94.2

120 MW

GT1

Generator

1

1980

Siemens

TLRI 108/41

10.5 kV, 125 MVA

GT2

Generator

1

1982

Siemens

TLRI 108/41

10.5 kV, 125 MVA

GT1 & 2

Generator Step-Up T/F

2

1982

Siemens

-

10.5 kV to 66 kV, 120 MVA

GT1 & 2

Unit T/F

2

1982

Siemens

-

10.5 kV to 6 kV

GT1 & 2

Main Oil Pump

4

1980

Siemens

ET8020VL

27.77 l/s

GT1 & 2

Secondary Bearing Pump

2

1980

Siemens

-

10.55 l/s

GT1 & 2

Lubricating Oil Cooler

2

1980

Luwa

EK 43/26-4R

13.32 dm/s

GT1 & 2

Fuel Oil Injection Pump

2

1980

Allweiler AG

SHF440 P46

750 l/min, 57.5 Bar

Common

Station T/F

2

1980

-

-

22 kV to 6 kV

Common

Auxiliary T/F

2

 

-

-

6 kV to 3.3 kV

Common

Auxiliary T/F

2

 

-

-

6 kV to 1400 V

Common

Auxiliary T/F

2

 

-

-

6 kV to 500 V

Common

Auxiliary T/F

2

 

-

-

6 kV to 380 V

Common

Auxiliary T/F

1

 

-

-

3.3 kV to 415 V

Common

Blackstart Diesel Generator

2

1981

JP Sauer & Sohn

WP13L100

2.9 MVA

Common

Blackstart Air Compressor

2

1999

Boge

SRH460

460 l/min, 35 BarG

Common

Mobile Air Compressor

1

1982

Fuji

EUV-15

9.9 kg/cm2, 317 l

Fire Fighting

Diesel Fire Pump

1

1980

 

-

1872 GPM

Fire Fighting

Electric Fire Pump

1

1980

 

-

1872 GPM

Fire Fighting

Hydrant Pump

2

1980

 

-

1200 GPM

Fire Fighting

Diesel Fire Pump

1

1982

 

820162/1

680 m3/hr

Fire Fighting

Electric Fire Pump

1

1982

 

810353/1

682 m3/hr

Fire Fighting

Foam Tank

1

1986

 

-

17.5 Bar

Fire Fighting

Water Storage Tank

1

1986

 

-

1100 m3

 

 Summary of Service Hours & Number of Start-Ups

GT Unit

Total Service

Hours[1]

EOH

Hours3

TTL No of Starts3

Number of Start-Ups

FY97/98

FY98/99

FY99/00

FY00/01

FY01/02

FY02/03

FY03/04

GT1

11,269

37,603

2,385

6

9

83

109

106

93

72

GT2

14,902

46,331

2,598

69

57

65

104

88

81

69

  

Overview of Operation & Maintenance

The Plant owner has consistently performed maintenance on the GT units in order to achieve consistently

high levels of availability, generation efficiency, peaking capability and reliable start-up.

Major Overhauls have been carried out at intervals of 25.000 EOH.

Inspections on the GT units are typically performed at 18-month intervals and cover the following scope:

-       General inspections of GT Thermal Block

-       Renewal of Air Filter Elements

-       Inspection & Renewal of Flame Tube Bricks (where required)

-       Inspection & Repairs to Air-filter House and Exhaust Diffuser/Stack

 

The owner performed a Major Overhaul on GT2 in October 1992. Similarly, a Major Overhaul of PPGT1

was last performed in November 1998 with the following scope:

-       Installation of new Flame Tubes complete with assembled Bricks

-       Installation of new Flame Tube Plates

-       Installation of new Inner Casing

-       Installation of new Transition Rings

-       Installation of new Stage 1 Compressor Rotor Blades

-       Repair of Mixing Chambers

-       Overhaul of Generator Alternator

 

 1. Equipment and Systems

The following Equipment, auxiliary and ancillary systems will form part of the Scope of Sale:

 

For each GT1 & GT2 Gas Turbine Unit:

-       GT Thermal Block

-       GT associated Fire Protection & Detection System / Gas Leak Detection System

-       GT Instrumentation & Controls

-       GT Monitoring & Protection System

-       GT Control Valve Block

-       GT Starting Motor and Torque Converter System

-       GT DC System with Battery & Charger

-       Ignition System

-       Fuel Firing System (for Distillate-oil Liquid Fuel)

-       Lubrication Oil System and Lubricating Oil-radiator Coolers

-       Control Oil System

-       On-line Compressor Cleaning System

-       Off-line Compressor Cleaning System

-       Air Intake & Filter System with Silencers and self-cleaning Elements

-       Exhaust Gas Stack, Exhaust Gas Ducting, Silencers, Expansion Joints, Aviation Obstruction Warning Lights and Lightning Arrestors

 

For each GT1 & GT2 Generator Unit:

-       Generator with air-cooling, including Generator main Connections, Generator Circuit Breaker, Isolated phase Bus-ducts and auxiliary Switchgear

-       Static Frequency Converter System

-       Static Excitation System with automatic Voltage Regulation Control

-       Lubricating-oil System and Lubricating Oil-radiator Coolers

-       Generator Cooling System

-       Generator associated Control, Instrumentation, Metering & Protection System

-       Generator Terminal Enclosure

-       Internal Piping & Cabling Integral to the Unit

-       Neutral Grounding Transformers/Resistors

 

For each GT1 & GT2 Transformer Unit:

-       Generator Step-up Transformer (10.5 kV to 66 kV)

-       Unit Transformer (10.5 kV to 6 kV)

-       Associated Protection, Control & Instrumentation System

 

Mechanical Auxiliary & Ancillary Systems:

-       Two (2) Distillate-oil Storage Tanks

-       Three (3) Distillate-oil Day Tanks

-       Distillate-oil Unloading System (from truck and ship)

-       Fire Fighting System, including Diesel Engine and electrically driven Fire Pumps, Water Storage Tank and Foam Storage Tank

-       Fire Detection & Alarm System

-       Black-start Diesel Generator and Black-start Air-compressor

-       Compressed Air System, including Compressors and Receivers

-       Turbine Hall Overhead Cranes

 

Electrical Auxiliary & Ancillary Systems:

-       Two (2) Station Transformers (22 kV to 6 kV)

-       Two (2) auxiliary Transformers (6 kV to 3.3 kV)

-       Two (2) Frequency Converter Transformers (6 kV to 1400 V)

-       Two (2) Exciter Transformers (6 kV to 500 V)

-       Two (2) Low Voltage Transformers (6 kV to 380 V)

-       One (1) Off-site System Transformer (3.3 kV to 415 V)

-       66 kV Switchgear for Interconnection to Electricity Grid

-       22 kV Switchgear for Station auxiliary Voltage System

-       6 kV Switchgear for Station auxiliary Voltage System

-       3.3 kV Switchgear for Station auxiliary Voltage System

-       380 V Switchgear for Station auxiliary Voltage system

-       380 V Switchgear for Station auxiliary Power System

-       220 V Switchgear for Station auxiliary Power System

-       24 V Switchgear for Station auxiliary Power System

-       220 V DC System including Chargers & Batteries

-       24 V DC System including Chargers & Batteries

-       Associated Protection, Control and Instrumentation System

 

Instrumentation and Control Auxiliary and Ancillary Systems:

-       Siemens Iskamatic Control & Protection System for GT units

-       Vibration Monitoring System for GT units

-       Ronan Sequential Event Recording (SER) system

-       Electro hydraulic Control System for GT units

-       Station CCTV System

  

2. Spare Parts and Special Tools

The following Spare Parts and Special Tools will be included in the scope of the asset sale:

 

Gas Turbine Unit Spare Parts

-       Sixty-four (64) pieces of V94.2 dual fuel diffusion burners (used condition)

 

Generator Unit Spare Parts

-       18 pieces - SHIM V40 A00A34K42 0704/00100

-       3 pieces - DUPLEX RES.TEMP.DET ID-NRA00B07E17

-       15 pieces - BRUSH CARBON NKF634 A00A35B70 0705/1

-       6 pieces - HOLDER DOUBLE BRUSH ID-NR A00D36C89

-       1 piece - MODULE ME2-2, MEAS INPUT C71451-A31-A11

-       1 piece - TRANSDUCER ZV4-2, IMPEDANCE C71451-A61A11

-       1 piece - PASS TP3-1, LOW C71451-A39-A8

-       1 piece - INDICATOR, SLIPPING LIMIT C71451-A69-A31

-       1 piece - STABILIZER STU2-2 C71451-A35-A13

-       1 piece - INVERTER WR4/GR3-5 C71451-A37-A22

-       1 piece - SETTER UG4-1, VOLTAGE C71451-A27-A21

-       1 piece - CONTROL WG4-1, ANGLE C72451-A95-A4

-       1 piece - INDICATOR N16-2, ZERO C72451-101-A14

-       1 piece - SET KUS4-1, RELAY C71451-A65-A10

-       1 piece - SETTER KG12-3, COMMAND C72451-A107-A9

-       1 piece - CONTROLLER UA1-1, VOLTAGE C72451-A139-A3

-       1 piece - SET RK2-1, RELAY CHT11 C72451-A103-A2

-       1 piece - REGULATOR, VOLTAGE FA-1 C72451-A141-A2

-       1 piece - MODULE POWER SUPPLY Y3 ARB11-P4D 2523-2A

-       1 piece - MODULE INTERLOCKING V30 ARB11-P2D 2565-2A

-       1 piece - MODULE TIME Z24 ARB11-P2D 2577-1A

-       1 piece - MODULE, RELAY Y24-2 ARB-P2D-2573-1A

-       1 piece - MODULE DECOUPLING V23 ARB11-B2D 2514-1A

-       1 piece - MODULE COMMAND Y29A 1ARB11-P3D 2598-2A

-       1 piece - MODULE COMMAND Y29B ARB11-P3D 2599-1A

 

Gas Turbine Special Tools

-       One (1) Generator Skid

-       One (1) Generator Trolley

-       One (1) set Generator Rotor Support (consisting of two pieces)

-       One (1) GT Turbine Lifting Beam

-       One (1) GT Turbine Bearing Shaft Support

-       One (1) set GT Compressor casing transportation I-beam (consisting of two pieces)

-       One (1) GT Compressor Bearing Shaft Support

-       Three (3) GT Combustion Chamber Supports

-       Three (3) Up-ending Clamps

  

3. Documentation

The following Documentation will be included in the scope of the asset sale:

-       Operation and Maintenance Manuals

-       GT Unit Major Overhaul Records

GT1 1st Major Overhaul, June 1990, 2nd Major Overhaul, November 1998

GT2 1st Major Overhaul, October 1992

 

Price 18.5 Million Euro.

 

===========================================================================

 

18.) 100 MW MAN Power Plant, HFO, 1992/1993
(10) x 10 MW, 11 kV, 50 Hz, 428 RPM
(10) x Diesel Engines:
Make : MAN B&W AG, Germany
Type : 9L 58/64
Rated Output : 11.925 MW @ 428 RPM
Water-cooled, In-line Engine, Exhaust Turbocharger with Intercooler
Fuel Oil Consumption : ? 205 g / kWh
Lub. Oil Consumption : ? 1 g / kWh
First Commissioned in 1992/1993 and still in Operation
Total Running Hours & Overhaul Condition : See below

(10) x Alternators:
Make : SIEMENS
Type : 1DK-5928-3DE 05-2
Excitation Mode : Brushless / Open Wind Cooling
Rated Capacity : 14500 kVA
Rated Voltage : 11 kV
Frequency : 50 Hz
Rated Current : 761 A
3-phase Synchronous
F Class Insulation

Existing Engine Performance Data:
Output : 10 MW
Fuel Oil Consumption : 213.927 g / kWh
Lub. Oil Consumption : 0.985 g / kWh

Price: 9.1 Million US$ FOB Far-East Port. - REDUCED PRICE!!

 

====================================================================

19.) 200 MW Diesel Power Generation Plant
The plant consists of 2 stations, one station has a capacity of 34 MW and consists
of 4 diesel generators, of which three is Japanese made with diesel engine Model 16PC2-6
combined with Japanese made generator NTAKL giving an output of 8,500 kW each.
The second station has 20 units of Sulzer diesel engines packaged with Alsthom generators
giving a total capacity of 200 MW.
The plant is considering to sell part or whole of the plant to have the land for other purposes.


1.      The Sulzer Diesel Engines
Model    16ZAV40S
Manufacturer  Sulzer, France
Rated Ouput   10,560kW (4 sets), 11,520kW (16 sets)
No. of Cylinders   16
Cylinder Diameter   400
Stroke Distance    560
Speed    500 rpm
Fuel Oil Consumption   205g/kWh
Lub Oil Consumption   1g/kWh
Maximum Continuous Power  10,560kW (4 sets), 11,520kW (16 sets)
Weight of Engine   132 tons

2.      The Generator
Model    RP256-90B (4 sets)   /     RP256-100 (16 sets)
Manufacturer    Alsthom, France   /    Alsthom, France
Designed Capacity    10,238kW    /      11,186kW
Output Voltage     10.5kV   /     10.5kV
Designed Current     704A   /     770A
Designed Speed    500 rpm   /     500 rpm
Designed Frequency    50Hz    /      50Hz
Power Factor     0.8 lagging     /      0.8 lagging
Insulation      Class F    /      Class F
Weight of Generator     43.55 tons    /      43.55 tons

Price: 22.5 Million US$, FOB Far-East Port. REDUCED PRICE

================================================================================

20.)  13 MW Diesel Power Generation Plant
The whole Plant consists of two (2) Deutsche / Siemens Diesel Generator units giving a total capacity of 13 MW @ 50 Hz
The units started operation in 1994 and have operated around 30,000 hours.
Since the land has to be cleared for other usage, the plant is now under dismantling process and will be stored pending for a Buyer.

Engine
Model : BV16M640
Manufacturer : Deutsche Diesel, Germany
Rated Output : 6590 kW
Speed : 600 rpm

Generator

Model : IDK4733-3 BE05-Z1994

Manufacturer : Siemens, Germany

Designed Capacity : 7950 kVA

Stator Output Voltage : 10 kV

Designed Speed ; 600 rpm

Designed Frequency : 50 Hz

Power Factor : 0.8 lagging

 

List of Auxiliaries

Mechanical

Electrical

Main Controller - VTR354-11

Oil Filter, Oil Purifier

Fuel Oil Pump, Fuel Oil Heater

Fuel Oil Systems (Pipings)

Lub Oil Pump, Lub Oil Cooler

Lub Oil Tank, Lub Oil Purifier

Sealing Oil Pump

Sealing Oil Tank

Heat Exchanger

Steam/Water Separator

Water Cooler

Cooling Water Pump

Cooling Water Tank

Water Circulating Pump

Water Tower

Pure Water Generator

Air Filters

Air Compressor

10kV Station Transformer Cubicle

Electrical Control Panel

Main Transformer Panel

Low Voltage Supply Panel

DC Supply Panel

Diesel Engine Control Panel

Diesel Auxiliaries Control Panel

Generator Control Panel

Security Alarm System Panel

Heat Exchanger Control Panel

Exciter Control Panel

 

 

This is a general list of supply.

Full details will be provided for potential Buyers.

Price: 2,140,000.00 US$ (for both sets)...This price includes:

1. The unit itself with all auxiliaries

2. Dismantling, re-conditioning, packaging and delivery to alongside ship at the nearest SEA-Port (far-east).

 

===========================================================================

 

21.) (2) x 8.47 MW MAN Power Plant, HFO, 1993

10.5 kV, 50 Hz, 600 RPM

 (2) x Diesel Engines:

Make : MAN B&W AG, Germany

Type : 14V40/45

Rated Output : 8.47 MW @ 600 RPM

Mean Effective Pressure : 21.4 Bar

(4) x Turbochargers, MAN NA40/TM8128

Governor : Woodward UG40

First Commissioned in 1993 and Overhauled in 2005

In 2005, all Engines were already Overhauled in accordance with MAN services / technical requirements / instructions.

Total 15980 / 16120 hours used until Overhaul, 4650 / 4670 hours used after last Overhaul in 2005

 

(2) x Alternators:

Make : SIEMENS

3-phase Synchronous / Brushless Excitation

Type : 1DK-5037-3DE05-Z

Rated Capacity : 10270 kVA

Speed : 600 RPM

Power Factor : 0.8

Rated Voltage / Frequency : 10.5 kV / 50 Hz

F Class Insulation

 

Station Service Transformer : Chinese made, 1600 kVA, 50 Hz 

-         Below-mentioned Scope of Supply is subject to Final Re-confirmation of the End-user during Inspection

-         All Sub-station Equipment / Transformers are not included in this Scope of Supply

-         Please see attached ‘Mechanical Part’ and ‘Electrical Part’

-         Photos will follow separately 

 

<< Mechanical Part >>

(2) x Fuel Oil Supply Systems:

Heavy Oil Daily Tank, 5 m3

Diesel Oil Daily Tank, 5 m3

Fuel Oil Mixing Tank, 300 liters

Fuel Sludge Tank, 250 liters

Fuel Oil Pre-heater

Fuel Viscocity Transducer / Measuring Devices

Fuel Oil Self-flushing Filter, Boll & Kirch, Type : 6.24.4DN40

Fuel Oil Separator, Alfa-Laval, Type : FOPZ609T-FD-24-50

Oil Feed Pump

Oil Heater

Supply Pump

 

(2) x Lub. OIl Supply Systems:

Lub. Oil Storage Tank, 15000 liters

Lub. Oil Circulating Tank, 12000 liters

Cylinder Jacker Lub. Oil Tank, 1000 liters

Sludge Lub. Oil Tank, 1000 liters

Plate Heat Exchanger, GEA

Lub. OIl Self-flushing Filter, Boll & Kirch, Type : 6.61 DN200

Lub. Oil Duplex Filter, Boll & Kirch, Type : 2.05.5.340.750 DN150

Lub. Oil Separator, Alfa-Laval, Type : LOPX710 SFD-34-50

Cylinder Jacker Lub. Oil Separator, Boll & Kirch, Type : 1.03.2.195.250 DN65

Pumps, Motor and relevant Devices

 

(2) x Cooling System:

Cooling Tower & Raw Water Pump

Plate Heat Exchanger, GEA, VT402

Pumps, Motor and relevant Devices

 

(2) x Water Supply Systems:

Booster

Treatment & Dosing Pump (Dosing Tank)

 

(2) x Compress - Air Systems:

Air Compressor

Air Receiver

De-compressor

 

(2) x Exhaust gas Systems:

Exhaust gas Boiler

    Capacity : 1400 kg/h

    Pressure : 13 bar

    Steam Temperature : max. 1700 degrees C

Relevant Pump & Devices 

 

<< Electrical Part >>

(2) x Three-Phase Synchronous Generator

Type : IDK5037-3DE05-Z

Rated Capacity : 10270 kVA

Rated Volatge : 10.5 kV

Frequency : 50 Hz

Power Factor : 0.8

Stator Current : 565A

Rated Rotation Speed : 600

Excitation Mode : Brushless

Connection : Y

Exciter Type : RGM240/15

 

(2) x 10 kV Switchgear Cabinet & Starpoint Earthing Equipment

Main Outgoing Feeder, Bus-coupler, Siemens, 3AF 1762-3

Geberator Cabinet & Station Service Transformer Cabinet, Siemens, 3AF 1766-3

PT Cabinet (including Bus Measure & Overvoltage Depressor, Siemens, 3CG 4053/5/1993/3158182

 

(2) x Low-voltage Distribution Panels

Switchgear for 380 V Station Service Transformer, Siemens, S05 S13 K02, VDE 0660(P-2), BS 4752/IEC 947-2, Type : 3WNI

Distribution Panel for 380 V

Distribution Panel for Engine auxiliaries

Distribution Panel for Common auxiliaries

 

(2) x Control, Measuring & Protection Panel

Used for Main Outgoing Feeder, Bus-coupler, Generator, Station Service Transformers & Local Outgoing Feeder etc...

The Alarm Signals are processed by SIEMENS Programmable Controller

 

(2) x Engine Control & Monitoring System

The Operating situation is monitored by SIEMENS Programmable Controller

 

(2) x DC 110 V & 24 V Equipment

The DC Equipment consistes of total 24 x 6 V batteries, Charger and Distribution Panels

 

Price: 3,600,000.00 US$ for both sets, including dismantling & packing

 

===========================================================================

 

22.) 2 TYPE S.E.M.T. - PIELSTICK 18 PC3V DIESEL - GENERATOR SETS  

Spares Package Included

Engine Power 12,6 MW each unit

Condition Mint  -- Total running hours 55,000

Used as a back up unit to Grid and to deliver energy to heating.

Manufacturer: Lindholmen G�teborg/Pielstick

Manufactured: 1974 and installed 1975-76

2 complete sets of diesel-generators incl. spareparts.

 

Engines

4-stroke, 18 cylinders, V-built turbocharged medium speed diesel type S.E.M.T. –

Pielstick 18 PC3V, manufactured by Lindholmen Motor in G�teborg.

Engine performance at 20C cooling water temperature, air 27C and 750 mm Hg

pressure:

Max output                                         12580 kW

Speed at max output                         428 rpm

Weight                                                           164 tons

As fuel                                                diesel oil or HFO can be used

 

Alternators

Alternators are fully encapsulated 3-phase synchronous Str�mberg design, provided

with water/air cooler and with following  main data:

Max output                                         12250 kW

Voltage                                               10500 V

Current                                               793 A

Frequency                                          50 Hz

Speed                                                            428 rpm

 

Transformers

ASEA manuf. 70/10 kV, 30 MV

Additional info

If above units kept warm, each engine can produce power to common grid in

less than 10 min after starting order.

 

Engine Power 12,6 MW each unit

Condition Mint  -- Total running hours 55,000

Used as a back up unit to Grid and to deliver energy to heating.

Manufacturer: Lindholmen G�teborg/Pielstick

Manufactured: 1974 and installed 1975-76

2 complete sets of diesel-generators incl. spareparts.

 

Engines

4-stroke, 18 cylinders, V-built turbocharged medium speed diesel type S.E.M.T. –

Pielstick 18 PC3V, manufactured by Lindholmen Motor in Goeteborg.

Engine performance at 20C cooling water temperature, air 27C and 750 mm Hg

pressure:

Max output                                         12580 kW

Speed at max output                         428 rpm

Weight                                                           164 tons

As fuel                                                diesel oil or HFO can be used

 

Alternators

Alternators are fully encapsulated 3-phase synchronous Str�mberg design, provided

with water/air cooler and with following  main data:

Max output                                         12250 kW

Voltage                                               10500 V

Current                                               793 A

Frequency                                          50 Hz

Speed                                                            428 rpm

 

Transformers

ASEA manuf. 70/10 kV, 30 MV

Additional info

If above units kept warm, each engine can produce power to common grid in less than 10 min after starting order.

 

Alfa Laval HFO Oil Treatment Plant

 

Air Compressor and Aux.

 

HFO Day Tank

 

Asking Price: Euro 650,000.00 EURO for the complete Powerplant.

 

===========================================================================

 

23.) 10.5 MW CATERPILLAR Diesel Power Plant, HFO, 1994

<< General Information >>

(3) x 3500 kW Caterpillar 3616 Diesel Generator Sets, 6.6 kV, 50 Hz

(2) ran continuous at 85 % loading and (1) kept as standby until 1999.

Plant is in perfect working order and now runs only in grid power outages.

D.G. Sets are designed for operation on Heavy Fuel Oil (Bunker "C").

Average gross kWH/liter of Bunker C as fuel achieved was 4.05 during continuous operation.

Power Plant is equipped with:

Associated Auxiliaries

Electrical Control

Power Switchgear with adequate standby units for reliable operation.

Plant does not have Waste Heat Recovery System although possible to install.

All scheduled Maintenance, minor & major, were carried out under the supervision of authorized

manufacturer representatives.

Set 1 (11881 hrs), Set 2 (18724 hrs), Set 3 (24909 hrs)

Tools & Tackles required for Maintenance are available

Manual for Operation & Maintenance, Specifications of all Equipments available

All Maintenance was done under Supervision of Dealer as per recommended schedule

Detailed Technical Specification and Photos attached

<< Terms & Conditions >>

The price quoted herein is for immediate acceptance and is subject to prior sale.

Equipment is quoted “as is where is', subject to inspection and prior sale" unless otherwise

indicated.

Payment must be made in full, prior to shipping, unless other arrangements are made and

agreed to prior to receipt of order.

Equipment is not warranted to be merchantable or fit for any particular purpose whatsoever.

Scope of Supply must be verified by customer during inspection.

Not responsible for errors or emissions

The description of all property listed herein is based on available information which is believed to

be reliable, but Seller makes no warranty or guaranty as to its reliability.

Removal is at buyer's risk and expense.

Buyer acknowledges the goods described herein are used goods, neither designed,

manufactured, nor altered by Seller.

As Seller has no knowledge of the specific application of the equipment by Buyer, Buyer

acknowledges it is Buyer's responsibility to provide proper safety devices for the intended

application or use so as to protect operator and others from harm and to comply with all federal,

state, and local government laws, rules and regulations relating to safety standards and all

industry safety standards.

Buyer agrees to indemnify, hold harmless and defend Seller from and against any and all claims

and liabilities arising out of the use of, or in any way involving injury or accident to person(s) or

property(s) occasioned by, said equipment.

 

<< Detailed Technical Information >>

Engines (3 nos.)

Make : CATERPILLAR

Model : 3616

Year of Manufacture : 1994

Year of Installation : 1995

Power : 4828 Hp, 3600 KW

Fuel Timing : 119.08 mm

Operating Speed : 750 rpm

Idle Speed : 350 rpm

Number of Cylinders : 50 degrees, Vee-16

Bore : 280 mm

Stroke : 300 mm

Type : 4-stroke, Cycle Turbocharged-Aftercooled

Compression Ratio : 13 : 01

Displacement : 296 L (18,036 cubic inches)

Rotation (Viewed from Flywheel ) : CW Optional

Injection Method : Unit Injectors

Fuel : Diesel/ Bancker C

Cooling System : Two Gear Driven Pumps separate Circuit

Coolant Static Head : 7 m, H2O ext. restriction @ 900 rpm

Allowable Exhaust : 250 mm, H2O

System Back Pressure

Maximum Inlet System Restriction : 380 mm, H2O

Air Cleaners : Remote Unit

Engine Weight : 29982 kg (Dry with Attachments)

Engine Weight : 31 615 kg (With Fluid & Attachments )

Displacement : 18.47 L

Cylinder : 1,127.3 cubic inches

Mean Piston Velocity : 9 m/s

Total Hours logged till Date : 11870 / 18687 / 24876 Hours.(D.G.no No 1, 2, 3 respectively)

Last Major Maintenance : 6196 / 15865 / 1465 Hours (D.G No 1, 2, 3 respectively)

 

Alternators (3 nos.)

Make : LEROY SOMER

Type : LSA 56 , VL 10/8P

Year of Manufactue : 1996, 1994, 1994 (Set no 1, 2, 3 respectively)

Synchronous : 3 Phases

No of Pole : 8

Connections : Star

Rated Output : 4375 kVA

Voltage : 6600 V

Frequency : 50 Hz

Power Factor : 0.8

Speed : 750 Tr / min

Protection : IP 23

Inlet Filters : Yes

Insulation : Cl : F

Temperatue Rise : Cl : F

Ambient Temperature : 40 �C

Cooling : IC 01

Excitation : Brushless

Voltage Regulation : R.B.S.

Equipment Plate : Short Circuit Comp.

Construction Type : Double Bearing

Bearing Type : Sleeve Bearing

Weight of Rotor : 6275 kg

Total Weight : 15300 kg

Stator Heat Protection : SME 202 (Quantity : 6)

Bearing Heat Protection : SME 202 (Quantity : 1)

 

Purifier Lun Oil (3 nos.)

Make : ALFA-LAVAL

Rated Capacity throughput : 2900 l/hr

Lub Oil throughput R&O Type : 1000 l/hr

Running up Time : approx. 2 min

Stopping Time : approx. 15-20 min

Electric Motor : 3 kW

Speed:

Drive Motor : 3000 rpm

Bowl Spindle : 9510 rpm

Sludge & Water Space : 1.05 litres

Power Consumption:

Idling : 0.9 kW

Running (HFO) : 1.8 kW

Running (MDO) : 2.0 kW

Operating Water:

Pressure : 150 - 600 kPa (1.5 - 6 Bar)

Total Consumption : 3 l (per Discharge)

 

Injector Tip Module

Make : ALFA-LAVAL

Motor : 2.2 kW

Max Work Pressure : 10 Bar

 

Purifier Bunker C (2 nos.)

Make : ALFA-LAVAL

Throughput Rated Capacity : 5600 l/h

Heavy Fuel Oil : 3500 l/h (throughput Capacity at Viscosity cSt/30�C )

Speed @50 Hz:

Drive Motor : 1420-1500 rpm

Bowl Spindle : max.7605 rpm

Starting-up/Stopping Time:

Starting Time : approx. 2 minutes

Stopping Time : > 4 minutes

Sludge & Water Space : 1.3 litres

Built-on Feed Pump Capacity : 2420 l/h

Suction Lift : max. 40 kPa

Delivery Head : max. 150 kPa

Built in Oil Outlet Disc Pump:

Electric Motor (at 50 Hz) : min. Size 4 kW

Power Consumption : 2.4 kW (running, Heavy Fuel Oil )

Total Water Consumption : 6 litres (per Discharge)

 

Cooling System (3 nos.)

Cooling Tower : CMB-W-300, COOLING MAN make

Motor : 10 HPX 4 Pole

Fan Ass'y : 2400 mm Dia. X 4 Blades

Sprinkler Head : CSH-200

Air Volume : 2200 mm /min (CFM)

Nominal Water Flow : 3900 l/min

Raw Water Pump

 

Booster Module (1 no.)

Make : ALFA-LAVAL

Module Type : SBM 45N-25N EE

Alfa Laval Oy Module No. : 280860-65

Total Power : 7400 kW

Max Fuel Consumption : 1600 l/h

Heavy Fuel Viscosity : 280 cSt/50'C

Heavy Fuel Day Tank Temp. : 60 �C

Heavy Fuel Flow to Engines : 8260 l/h

Electric Power Supply : 380 V / 50 Hz

Heating Medium : Electrical

EL. Consumption : 72 kW

 

Viscochief:

Make : ALFA-LAVAL

Model : EVT-10C

Power Supply : 24/48VAC

Power Consumption : maximum 8VA

Ambient Temperature : maximum 70 �C

Working Pressure : maximum 4 Mpa (40 Bar)

Testing Pressure : maximum 6 Mpa (60 Bar)

Enclosure : IP55

Output : 4-20 mA

Measuring Range : 0-50cSt

Material : Housing-Modular Cast Iron

Mounting Style : Avoid Air Pocket

Flange Connections : according to DIN2633 or JIS B2210(20K)

 

Viscosity Control Unit (Remote/Local):

Make : ALFA-LAVAL

Model : VCU-160 R/L

Power Supply : 110, 127, 220 VAC; 50/60 Hz

Power Consumption : maximum 75 VA

Ambient Temperature : 55 �C

Enclosure : VCU-160 R:IP20, VCU-160 l:IP54

 

Electric Preheater:

Make : A/S VESTA

Model : EO 72

Working Pressure Shell : 10 Bar

Working Temperature Shell : 150 �C

Power Rate : 72 kW

Power Supply : 3 x 380 V, 50 Hz

Intended for : Alfa-Laval ind.PL-51 SF-02271-Espoo Phu

 

Air Compressors

Electric Compressor : ATLAS COPCO, Type.LT55 30U, S/N.AIW046442, 1500 rpm, 5.5 kW, 30 Bar

Electric Driven : LELOY SOMER Motor, S/N.756501JA014, 5.5 kW, 380 V, 50 Hz, 1420 rpm

Egine Compressor : ATLAS COPCO, Type.LT730, S/N.AM295298, 1800 rpm, 30 Bar

Engine Driven : YANMAR Engine, Model.TF110, S/N.014188, 7.5 kW, 2400 rpm

 

Auxiliary Tank Capacity

Daily Tank : 20000 liters

Setting Tank No.1 : 20000 liters

Setting Tank No.2 : 20000 liters

Setting Tank No3 : 20000 liters

Diesel Tank : 5000 liters

Lube oil Tank : 5000 liters

Air Compressor Tank No.1, 2, 3 : 30 Bar

Lube Oil Injector : 600 liters

 

Control Panel

Generator Control Panel: UNILIB make (3 nos.)

The Panel have full Protection Device:

Deferential Transformer : Basler Electric Model.BE1-87T

Deferential Alternator : Basler Electric Model.BE1-87G

Ground Fault : Basler Electric Model.BE1-50G

Reverse Power : Basler Electric Model.BE1-32R

Reverse Reactive Power : Basler Electric Model.BE1-32R

Under/Over Voltage : Basler Electric Model.BE1-27/59

Over Current on each Phase : Basler Electric Model.BE1-50/51B-103

Frequency Relay : Type.252-Phuw, CROMPTON make

The Control is by PLC : Idec FA-2Junior

Governor : KG30-04-FB, FRITZ HEINZMANN make, Range 1500-4250 Hz, 24V.

Synchronizer Load Sharing : LMG03, FRITZ HEINZMANN make, Range 115/220 V, STG30-01

Actuator : STG30-01, FRITZ HEINZMANN make

Automatic Voltage Regulator : RBS600, LEROY SOMER make, 3 phase,100 W, 380/400-100/110V , 50/60

Hz

Fault/Alarm Annunciator : 38 Nos

 

Master Control Panel : UNILIB make (1 no.)

Over Current : Basler Electric Model.BE1-50/51B-103

Frequency Relay : Type.252-Phuw, CROMPTON make

The Control is by PLC : Idec FA-2Junior

Fault/Alarm Annunciator : 33 Nos

 

Switchgear

Generator Switchgear (3 Nos):

ABB make

SF6 CB

1250 A, 25 kA , 24 kV, 50 Hz

Sace Ha2/ZC-24-12-25 ABB

O/V Relay

K2CA-D03-R2 Omron

Feeder Switchgear (1 No):

ABB make

SF6 CB

1250A,25 KA ,24 kV, 50 Hz

Sace Ha2/ZC-24-12-25 ABB, O/V Relay

K2CA-D03-R2 Omron

Station Switchgear (1No):

ABB Make

Load Break SW. 16 kA, 630 A

 

Battery Charger

110 VDC Battery : Valve regulated Lead Acid Battery, NP65-12 ,12 V, 65AH, YUASA make, 9 Nos

24 VDC Battery : Valve regulated Lead Acid Battery, NP65-12 ,12 V, 65AH, YUASA make, 2 Nos

 

Transformer

Step up transformer:

Make : TIRA THAI

Rating : 4500 kVA

Primary Voltage : 6600 V

Secondary Voltage : 22000 V

Cooling : ONAN

Connection : Yd1

 

Auxiliary Transformer (Step down)

Make : TIRA THAI

Rating : 800 kVA

Primary Voltage : 22000 V

Secondary Voltage : 400/230 V

Cooling : ONAN

Connection : Dyn11

 

MDB

Feeder List:

Cooling Pump Starter : 160 A, 4 nos.

Heater : 80 A, 3 nos.

Water Booster Pump Starter : 15 A, 1 no.

HFO Pump Starter : 63 A, 2 nos.

Cooling Fan Starter : 63 A, 4 nos.

Lube Oil Pump Starter : 15 A, 4 nos.

Air Compressor : 25 A, 2 nos.

Ventilation Fan Starter : 25 A, 4 nos.

Vokes Filter : 25 A, 4 nos.

Jecket Water Heater : 80 A, 4 Nos.

Lub Oil Module : 25 A, 4 nos.

Tip Cooling Module : 15 A, 4 nos.

HFO Booster : 200 A, 1 no.

HFO Separator : 250 A, 1 no.

Lighting Panel : 250 A, 1 no.

Spare : 250 A, 2 nos.

 

CT/PT Panel

Potential Transformer (PT) : 6.6 kV/110 V, 200 VA, MITSUBISHI make

Diff Transformer CT : 500/5 A, 20 VA, Class 1, NITECH make

Diff Gen CT. : 500/5 A, 20 VA, Class 1, NITECH make

CT. Rod : 1250A, ABB make

 

Registor Panel (3 nos.)

Neutral Grounding Resistor

System Voltage : 6.3 kV

Line to Neutral Voltage : 3637 V

Initial Amp : 300 A

Max Time on : 10 �C

Ohms @25'C : 12.1 Ohms

Max Temperature Rise : 750 �C

Ground CT : 60/5 A, 15 VA, 5P5

Protection/Metering CT : 500/5 A, 40VA, 5P10

Diff Gen CT : 500/5A 20VA Class1

Earth Box

Ground CT : 60/5A ,15VA, 5P5, NITECH make

 

ALL SERIOUS OFFERED WILL BE CONSIDERED

 

===========================================================================

 

24.)  Make : Nihon Kokan (NKK), Japan

Model : GDF4335T07

5000 kW (6250 kVA), 3450 V, 514 rpm, HFO

Two (2) units available.

New in 1995, 6300 hours used..... 

Price & Further details available on request.

 

===========================================================================

 

25.) Make : Niigata, Japan

Model : 18V32CLX

6200 kW (7750 kVA), 6.6 kV, 600 rpm, HFO

Two (2) units available.

New in 1998 

Price & Further Details available on request

 

===========================================================================

 

26.) 480 MW (120MW X 4) Power Units

 

Technical data of Plant A

 

1.       Steam turbine

Horizontal, Close couple, Reheating, Impulse :

Manufacturer: AEI (Associated Electrical Industrial Ltd.)

Output capacity:120MW

Series : H.P Case--- 11

        M.P Case---13

        L.P Case---6 double discharge

Rotary speed : 3000rpm

Main steam working condition before mail valve :124.1bar(1800bsi) at 1000°F;

Reheat steam working condition before reheat steam valve:23.9bar(346bsi) at 1000°F;

Condenser vacuum : 848mBar at 77°F of circulating water temperature.

 

2.       Extraction

H.P heater No. : 3

L.P heater No. :2 (gland, water cooler)

3.  Condenser

Type : Double body, Rectangular,

Capacity :754,242Lb/Hr,

Pressure : 200 inch Mercury column(abs.),

Design cooling water temperature : 77°F

Water flow : 7000Gallon,

Face area : 800002ft,

Cooling water pipe (brass); 1 inch out diameter,12200,

No. of air vent : 2

Speed of cooling water in pipe : 6.9ft/sec

Head lose of cooling water in pipe: 15ft in water-level gage

 

4.       Auxiliaries of steam turbine

 

4.1   Condensate pump

Horizontal,Cenrifugal,2 Stages,

Manufacturer : Mather &Platt Ltd.,

Suction pressure :2 inch pump column (Abs.),

Total head;: 235 ft,

Capacity : 1170 Gallon/min,

Electrical motor : 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—415V

         Rated current—170A

         Power—101kW (135 Horsepower)

         Speed---985rpm.

 

4.2   Air pump

Type         Rotary, Le-Blanc,

Capacity      80Lb/Hr,

Electrical motor : 3Phase,50 Hz,Squirrel-cage induction motor,

         Voltage—415V

         Rated current—140A

         Power—82kW (110 Horsepower)

         Speed---1465rpm.

4.3   Cooling water pump

60 Inch, Sigel stage, Vertical, Pendant mounted, Mix flow, Impeller type,

Manufacturer : Mather & Platt Ltd.,

Head  40 Inch,

Flow rate ( sea water ) : 5.57M3/min (73500Gallon/min ),

Pressure :1.3 Bar(18.4Lb/in2,

Electrical motor : 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—3300V

         Rated current—2045A

         Power—1000kW (1340 Horsepower)

         Speed---300rpm.

 

5.       Electrical equipment

5.1   Generator

Double pole, Cylindrical rotor, Coaxial coupling, 3000rpm,50Hz ,3 phase ,

Manufacturer: AEI (Associated Electrical Industrial Ltd.)

Output capacity :120MW,

Power factor 0.8,

Stator voltage : 13800VCooling way : Hydrogen cooling.

 

5.2   Mai transformer

   Manufacturer:: ENGLISH ELECTRICITY (EE)

   Rated capacity : 145MVA,

   Voltage ratio at no load :154.5/13.8kV,

   Neutral point wiring (HV /LV/),

 

5.3   Unit transformer

   Manufacturer:: ENGLISH ELECTRICITY (EE)

   Rated capacity : 9MVA,

   Voltage ratio at no load :13.8kV/3.47kV,,

   Neutral point wiring (HV /LV /),

 

5.4   Plant transformer (HV transformer )

   Manufacturer:: ENGLISH ELECTRICITY (EE)

   Rated capacity : 15MVA,

   Voltage ratio at no load :132kV/3.435kV,,

   Neutral point wiring (HV /LV /),

 

6.       Boiler

4 stage overheating,1 stage preheating, Natural circulating, Vertical water wall, Oil fired type

Manufacturer:: ICL (International Combustion Ltd.)

Working pressure of steam drum :149.3Bar(2165Lb/in2) standard metering ,

Outlet pressure of over-heater : 131.0Bar (1900 Lb/in2) standard metering,

Outlet temperature of over-heater :1005(540.56℃),

Inlet pressure of pre-heater : 28.2Bar(410 Lb/in2) standard metering,

Inlet temperature of pre-heater :628(331℃),

Outlet pressure of pre-heater : 26.9Bar(390 Lb/in2) standard metering,

Outlet temperature of pre-heater :1005(540.56℃),

Gasifying ratio : 105.5kg/s(840000Lb/Hr) (379.80T/H),

Flow rate of pre-heater : 9.8kg/s(776000 Lb/Hr) (332.08T/H),

Oil consumption : 7.4kg/s (58720 Lb/Hr) (26.64T/H),

Boiler’s efficiency at full load : 87.1% as environment temperature is 60,

 

7.       Boiler’s auxiliaries

7.1   Induced draft fan

Double suction, Constant speed, Win type, Damper control type,

Manufacturer:: ICL (International Combustion Ltd.)

Head : 11.38 Inch (289.052mm) water column,

Working temperature : 148.9℃(300),

Capacity : 86.8 M3/s(1840000Ft2/min)(312480 M3/Hr),

Electrical motor (AEI): 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—3300V

         Rated current—65A

         Power—309kW (415 Horsepower)

         Speed---980rpm.

7.2   Forced draft fan

Double suction, Constant speed, Win type, Damper control type,

Manufacturer:: ICL (International Combustion Ltd.)

Head: 13.92 Inch (335.28mm) water column,

Working temperature : 26.7℃(80),

Capacity : 60.0M3/s(127200Ft2/min)(216000 M3/Hr),

Electrical motor: 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—3300V

         Rated current—56A

         Power—216kW (350 Horsepower)

         Speed---980rpm.

7.3   Flue gas circulating fan

Single suction, Constant speed, Damper control type,

Manufacturer:: ICL (International Combustion Ltd.)

Head : 7.59 Inch water column,

Working temperature : 310℃(590),

Capacity : 28.3M3/s(59900Ft2/min),

Electrical motor: 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—415V

         Rated current—155A

         Power—89kW (120 Horsepower)

         Speed---985rpm.

 

7.4   Water-feeding pump

Manufacturer : Mather & Platt Ltd.,

Head : 29.3Lb/in2

Feeding water temperature :121℃(249.5),

Capacity :111.5kg/s(885000Lb/Hr),

Feeding water pressure : 159.6Bar(2315Lb/ in2) standard metering,

Electrical motor (AEI): 3Phase,50 Hz, Squirrel-cage induction motor,

         Voltage—3300V

         Rated current—504A

         Power—2535kW (3400 Horsepower)

         Speed---2980rpm.

 

Running records of 120mw units

 

NO.

of

Unit

Time of Completion

Total

Running

Hours

Times

of Hot

Start

Times

of

Warm

Start

Times

of

Cool

Start

Total

Start

Times

Remark

T1

April,17,1969

101,052

999

416

260

1,675

 

T2

Nov.,26,1969

102,506

1,025

459

234

1,718

 

T3

Feb.,6,1971

87,631

1,497

487

272

2,256

 

T4

Jul.,8,1971

83,999

1,456

465

270

2,191

 

 

 

 

Price:  130 Million US$

The price comprising the Following Packages:

1)       Dismantling, Re-conditioning , Refurbishing , Repacking & Relocation .

2)       Replacing all the 4 boilers with 4 brand new Boilers .

3)       Transporting all the equipment & machinery to (CIF) Any Port . Owner

have to pay for all local transporting charges from their Port to the

Plant’s location in their country and local duties.

4)       Installing and Fabricating the 4 units of Second Hand Power Plant units

Under 1  building structure ( built by the Owner ) until fully commissioning and generating of electricity at your plant location.

It will take about 9 to 12 months to fully complete the installation .

5)       Standby 2 to 3 Engineers for at least 6 months to 9 months ( during the Warranty Period )  after the commissioning

       to make sure the plants are running properly.

6)       To transfer technology and to oversee and hand over the plants to the Owner’s local technicians and engineers during the 6 to 9 months of

Commissioning of the plants.

7)       Payment: To be discussed on the payment formula to be presented by the Seller.

 

Best regards
CH Non-Food Import-Export Corporation
British Virgin Islands
Phone: 1 206-201-2420
Fax: 1 206-337-0754
mailto:office18@ch-non-food.com
http://www.ch-non-food.com/