CH Non-Food Import-Export Corp

 

Circular  July 2008 II

 

 

Dear Sirs

subject to prior sale we can offer

  

1.)   12.5 MW complete Biomass Power Plant

Manufacturer:  Westinghouse Turbine and Generator (1953 vintage), Zurn Boiler

(original boiler at construction)

Year of Construction:  Facility in 1983

Running hours:  It ran at approximately 93% to 97% capacity from 1983 to 2002

Location:   USA

TURBINE-GENERATOR - SPECIFICATIONS

CLASSIFICATION: 1953 Westinghouse Condensing, Extraction, Impulse Turbine driving a Two-pole AC Generator at 3600 RPM.

UNIT RATING: By design, the limitation of the turbine-generator unit is the limitation of the prime mover - the turbine. Thus, maximum output is 12,650 Gross KW.

TURBINE RATING - STEAM PRESSURE: 600 PSIG

STEAM TEMPERATURE: 825 degrees Fahrenheit

STEAM FLOW: 125,000 LB/HR

EXHAUST PRESS.: 1.5 Hg

KILOWATTS: 12,650 kw

STEAM VARIATIONS

PRESSURE: The initial steam pressure at the turbine throttle valve inlet shall not exceed 600 psig average over a 12 month period of operation at rated load. At reduced load the average should not exceed 630 psig. Absolute maximum inlet pressure in abnormal situations is 780 psig (aggregate duration of this pressure not to exceed 12 hours per 12 month period).

TEMPERATURE: The initial steam temperature at the turbine throttle valve inlet shall not exceed 825 F average over a 12 month period. Absolute maximum inlet temperature in abnormal situations is 875 F (at this temperature, limit is 15 minutes duration per swing and aggregate duration not to exceed 80 hours per 12 month period).

GENERATOR RATING - VOLTAGE: 12,500 AC

AMPERAGE : 625

POWER FACTOR: .85

FREQUENCY: 60 Hertz

KVA 13,529

EXCITER RATING - VOLTAGE: 250 DC

AMPERAGE : 260

TURBINE INFORMATION

THROTTLE VALVE: The throttle valve is hydraulically operated to control the flow of steam to the turbine during start-up. Turning the valve wheel repositions a valve that controls the flow of high-pressure oil into the operating cylinder. The operating cylinder is used in conjuction with the low oil and overspeed trips on the unit.

STEAM CHEST: The turbine governor controls the steam chest first stage nozzle valves. The valves seats are of the diffuser type. Partial-load operation is more efficient this way due to the reduction of throttling losses.

BLADING: 1 - CURTIS (VELOCITY COMPOUNDED)

13 - IMPULSE

3 - PAIRS OF ROWS OF REACTION BLADING

The major difference between impulse and reaction blading is the shape of the blades. By design, impulse blading gets a pressure drop, and thus work, accross the moving blades only. The fixed blading, or diaphragms serve only to redirect the steam. With reaction blading, there is a pressure drop accross the fixed and moving blades. Therefore, reaction blading is usually used in the low pressure end of a turbine before entering the condenser. Although work is done across fixed and moving blading, reaction blades are less efficient than impulse.

EXTRACTIONS: There are four extractions on this turbine for heat exchanger and gland seal supply steam. For more information, see Specs - Boiler / Steam

ROTOR GLANDS: The glands are of the Labyrinth-type. Multiple spring-back seal rings maintain very close clearance to the turbine rotor. Steam at approximately 1 psi is supplied to the high and low pressure glands to further seal the clearances. The gland at the low pressure prevents air from leaking in. The gland at the high pressure end prevents steam from leaking out.

GENERATOR INFORMATION

A generator has three requirements: 1) A magnetic field, 2) a conductor, and 3) relative motion between the two to cut flux and produce electricity. The Bio Energy generator consists of two generators. The exciter which produces DC power and the generator which produces AC power (an AC generator is also called an alternator). The generated DC voltage of the exciter, (usually in the 100 - 150 DC V range at 120 - 170 DC A), supplies the magnetism to the generator 2-pole rotor. The stator, or stationary windings, of the generator are the conductors.

A General Electric current limiting reactor is installed to prevent the destructive flow of energy that may be caused by a short circuit or overload. A multitude of realys are also interlocked to protect the generator and exciter from abnormal conditions.

Cooling for the generator is provided by two water cooled heat exchangers that run the length of the unit on both sides. The exciter and collector are cooled by a shaft driven fan which takes suction and discharges to the area below the unit.

Price: 3,850,000.- USD

needs to be removed from the site.

Detailed information as Scope, Drawings, Pictures, Calculations etc on request.  

 

For more information ask by Email

 

Back to Homepage 

 

 

 

(2) x 250 MW Coal Powered Plant

Item Specifications

Manufacturer Alsthom 

Fuel Coal 

Frequency 50 Hz 

Year 1961 

Hours of Operation 157000

RPM 3000
Plant Constructed In : Unit 1 – 1961
Unit 2 – 1965
Shutdown in : Unit 1 – 1999
Unit 2 - 2005

Working Hours : Unit 1 - 156978

Unit 2 - 184095

Boiler :

Construction by : Babcok and Wilcox

Type of Boiler : Natural Circulation

Firing : Coal

Burners : Tangential , 8 Mills Pulverisation Fuel Auxiliary / 24 Chambers.

Boiler 1 Boiler 2

Steam Generator Pressure 166 bar 190 bar

Continuous maximum vaporization 770 t/h 735 t/h

Normal Vaporization 700 t/h 690 t/h

Vapor debit resurchauffée in% 87,5 91

Vapor pressure gone out surchauffeur 144 bar 167.6 bar

Vapor temperature gone out surchauffeur 568 Deg.C 568 Deg.C

Coal Mills:

Coal Silo - Chain Conveyor - Mills

Mixed Air / Pulverised coal , 80 Deg.C

Boiler 1 and Boiler 2:

8 Mills with pendular rollers, output 8 to 18 t/h mill ventilates by vacuum exhaust

4 mills per chamber.

Coal Storage Area:

2 Coal Collectors ( supply 90 Tons Conveyors )

Conveyor Capacity : 1000 t/h

Steam Turbine Generator

Turbine 1 - Construction by : SFAC Westinghouse

Turbine 2 – Construction by : CEM

Turbine 1 Turbine 2

Normal Output : 250 MW 250 MW

Maximum output : 270 MW 270 MW

Speed : 3000 rpm 3000 rpm

HP Inlet

Pressure : 138.2 bar 162.8 bar

Temperature : 565 Deg.C 565 Deg.C

MP Inlet

Pressure : 30.9 bar 33 bar

Temperature : 565 Deg.C 565 Deg.C

Condensor Pressure : 35 mbar 35 mbar

Alternator:

Turbine 1 - Construction by : Alsthom

Turbine 2 – Construction by : CEM

Turbine 1 Turbine 2

Normal Output : 312 MVA 295 MVA

Voltage : 12.6 KV 20 KV

Nominal Amperage : 7100 A 8500 A

Hydrogen Pressure : 2 .4 bar 2 bar

Cooling of the Rotor bars and stator : Hydorgen

Type : Floating seal with oil Seals.

Electrostatic Precipitator :

Removal : > at 99.8 %

Prime Voltage : 380 V

Secondary : 90 Kv

3 Chambers

The electric charged plates are rapped with hammers.

Evacuation of Ash by VACUUM

Price

 

For more information ask by Email

 

Back to Homepage 

 

 

 

(5) x 100 MW AEG Coal Plants

REFURBISHED 100 MW RATED PULVERISED COAL FIRED ELECTRICITY GENERATING STATION

Manufacturer AEG 

Fuel Coal 

Frequency 50 Hz 

Model 11/100 220

Generator Type: FKWS 3742 p 

Year 1966 

Hours of Operation 160000

RPM 3000 
TECHNICAL DETAILS
DOUBLE-CASING CONDENSING TURBINE
Type 11/100 220
AEG-TELEFUNKEN
THREE-PHASE SYNCHRONOUS GENERATOR

WITH HYDROGEN COOLING

Type FKWS 3742 p

AEG – TELEFUNKEN
Each boiler with electrostatic precipitator plant to fit within the space available.
Boilers 1 & 2 I.C.A.L. 100 MW rating Contract No.10931

Boilers 3, 4 & 5 Mitchell Eng. 100 MW rating Contract No. 7298
At present the plant consists of four 100 MW rated steam turbine generator units

complete with boiler plant and auxiliary equipment. The units are in a ‘moth-balled’

condition.

AGE

DATE FIRST UNIT COMMISSIONED : 31/03/1963

DATE LAST UNIT COMMISSIONED : DECEMBER 1968

COAL

ANNUAL CONSUMPTION: WHEN GENERATING 1,9 MILLION TONES

STOCKPILE VOLUME: WHEN GENERATING 220 000 M3

SILOS/STAITHES: (2) CAPACITY 28 000 TONS

BOILER BUNKERS: (15) CAPACITY 500 TONS EACH

ASH CONTENT: 20 %

MILLING PLANT

MANUFACTURERS: BOILERS 1, 2 &4 PHI ENGINEERING

BOILERS 3 MITCHELL ENGINEERING

MILLS - 3 PER BOILER

TYPE: BOILERS 1, 2 & TRACK AND TYRE MILLS

BOILER 3 TUBE MILLS

OUTPUT: 22,7 TON PER HOUR, PER MILL (MAX. RATING 25 TONS PER HOUR)

BOILERS

MANUFACTURER: BOILERS 1 & 2 I. C. A. L.

BOILERS 3 & 4 MITCHELL ENGINEERING

TYPE: P.F. FIRED, WATER TUBE BOILERS

RATING: 900 000 LBS PER HOUR CONTINUOUS MAXIMUM RATING,

AT 1250 PSIG. AND 965 ºF

BURNERS (PER BOILER) 12 UNITS

TURBINES

MANUFACTURER: AEG

TYPE: TURBINE 1 & 2 11/100120

3, 4 & 5 11/100220

RATING 100 MW CONTINUOUS

GENERATORS

MANUFACTURER: AEG TYPE FKWS 3742 P

RATED CAPACITY: 100 MW

TERMINAL VOLTAGE: 10,5 KV

ASH PLANT

TYPE: WET SYSTEM (HYDROVAC ASHING SYSTEM)

PRECIPITATORS

MANUFACTURER: BRAND ENGINEERING (PTY) LTD

TYPE: ELECTROSTATIC 5 FIELDS UNITS 1 & 2

3 FIELDS UNITS 3, 4 & 5

GENERATOR TRANSFORMERS

MANUFACTURER: 1 & 2 AEG

3, 4 & 5 OERLIKON

RATE CAPACITY: 110 000 KVA

TERMINAL VOLTAGE: 10,5/275KV

COOLING SYSTEM

WET SYSTEM THROUGHOUT

COOLING TOWERS (4)

TYPE: NATURAL DRAUGHT, CONCRETE

HEIGHT: 93,4 METRES

CHIMNEYS (2)

HEIGHT: 119,48 METRES

TYPE: SINGLE FLUE - CONCRETE

Price: 

SCOPE

 

 

 

One (1) 48 MW Power Barge along with Fuel Barge

 Gas Power Barge designed by Westinghouse (now Siemens) and built by Sabah  Shipyards.

Barge has one Westinghouse 251b11 simple cycle gas turbine  generator set alone

with all associated equipments for simple cycle  operation.

The barge is single haul construction and designed and built in  accordance with American bureau of shipping (abs) rules.

The barge was built  in 1996, operated from march 1997 to june 2004.

 a) Barge Detail

 Power Barge:

 length (overall)   70.0 meter

 beam (molded)      14.0 meter

 depth (at side)     5.0 meter

 draft (estimated)   4.3 meter

 Fuel Barge:

 length (overall)   92.0 meter

 beam (molded)      22.0 meter

 depth (at side)     5.0 meter

 draft               4.3 meter

 b) Gas turbine generator

 Turbine skid consisting of Westinghouse "econopak" (Siemens) w 251 b-11

 combustion turbine 49,500 kw, iso base rating, 18.8 lb pressure

 ratio, 386.0 lb/sec mass flow, 5425 rpm turbine speed, 957 f exhaust

 temperature. heat rate: 11,800.52 btu/kwh, diesel fuel,

 electric start motor with auxiliary gear

  Westinghouse 1000 hp, frame 4509, 6600/3300 v, 3 phase, 50 hz, rpm: 1486/1481

 gear reducer with quill shaft

  lufkin model:n3007c, ratio:1.806:1, speed: 5418/3000 rpm

  application factor:1.43, application power:115267 hp, unit power: 80460 hp

Generator

  brush type:turbogenerator, frame:bdax7-290er, continuous rating,

  rating: 65882 kva, rpm:3000, volts:11.5 kv, 3 phase, 50 hz, pf:0.85

  amps:3307, insulation class rotor/stator: f/f, phase connection:star

  excitation volts/amps:250/1035, spec:iec 34.3

  machine number:62034a-ig year built:1995

  brushless exciter

  brush, frame:bxj40-20, continuous rating, spec:iec 34.3, insulation: class f

  dc volts/amps:225/1138, field volts/amps:51/7.2

  machine number:62034a-1e pmg

  frame:pmx 34-10, rpm:3000, phase/hz:1/400, volts/amps:200/15

  machine number: 62034a-1p

 turbine inlet air filter with housing

  aaa filter house, av-6 w/l, style code: coalescep duravee 90

  model number:107-1710409-b, control number: 442-025, size:294000 cfm

 generator inlet air filter and exhaust air with housing

 turbine exhaust stack upwards 50 feet

 lube oil skid with pumps etc.

 turbine and generator housing with fire protection system

 distillate fuel divider, manifold.

 fuel treatment module with pump

 piping connection point with isolation valves from fuel barge to power barge.

 internal piping

 generator line side and neutral side cubicles

 lube oil air fin fan cooler

  c) Control room

 Westinghouse wdpf ii turbine control panel

 ep voltage regulator

 generator protection panel

 dc battery charger, mcc. dc motor starter

 d) generator breaker panel

 westinghouse type 150 vcp-w750, 15 kv, 3000 amp, 28 ka, 60 hz

 with pt's section and fused disconnect switch

  e) transformer and other equipments

 generator gsu transformer

  abb power tech

  50/60 mva, 3 phase, 50 hz, type tba-41, onan/onaf

  33 kv to 11 kv, total weight 71,630 kgs 

  impedance: 11.5%

 auxiliary transformers

  virginia oil filled, 750 kva, 3 phase, 50 hz, 11,500 v to 400 grdy/230 v

  al winding, 65 deg c rise,

  virginia oil filled, 1,500 kva, 3 phase, 50 hz, 11500 v to 6900 y/3985

  al winding, total weight:14,000 lbs,

 Westinghouse ampguard motor starters

 mcc room with mcc

 fire pump with motor

 air compressor atlas copco model zt45 product number 8972432779,

  with air receiver.

 general iso phase bus duct

 emergency diesel generator set, kohler model: 200rozd,

  with baylor generator, model: g 450 zst-480, 1700 kw, 2125 kva, 1500 rpm,

  11500 wye, 3 phase, 50 hz,

  spare parts/tool room

  viatec dm water plant

  office/record room

  hamwothy super trident sewage treatment unit, size st-2a, g.o. no: 47167-03

  1.6 cu. m/day 

 f) Fuel Barge

  7500 dwt fuel storage barge. with four fuel pumps leist ritz type l3mg

   80/160 and two spare pumps

   all interconnecting pipes.

Price: 33 million USD as where it is

 

For more information ask by Email

 

Back to Homepage 

 

 

 

22.5  MW used Steam Generator Set 

 Steam Turbine - Manufacturer: General Electric
 Rating: 22.5 MW
 Inlet steam: 600 psig/750 deg f
 Extraction steam: 140 psig  0-180,000 lbs/hr
 Admission steam: 95 psig  0-50,000 lbs/hr
 Exhaust steam: 1.5" hga, axial exhaust
 Maximum inlet steam flow: 210,000 lbs/hr
 Rating with zero extraction and zero admission: 20 MW
 Steam rate zero extraction: 8.8 lbs/kw
 Speed: 3600 rpm
 Number of stages: 12
 Governor: Woodward 505e
 Generator - Manufacturer: General Electric
 Rating: 25,000 kva
 Volts: 13800 v, 3 phase, 60 hz
 Amps: 1046
 Field amps: 376
 Excitation volts: 250 v
 Power factor: 0.9
 Condenser - surface area: 19,574 sq. ft
 Steam load: 204,896 lbs/hr
 Circulating water flow: 23,365 gals/min
 Scope of supply - steam turbine generator skid mounted
 Complete condenser with water isolation valves
 Air ejector package
 Lube oil system with lube oil cooler
 Control oil system
 Turbine control panel
 Generator breaker and control panel
 Gland steam system cooling
 Water pumps with motor (2 pcs)
 Condensate pumps with motor (3 pcs)
 History - year built: 1993
 Year shutdown: 2008
 Year last overhaul: 2000
 Unit is very good condition and ready to run.

 

PRICE: 1,900,000.- USD net. "As-is where-is" FOB site.
+ Boiler available "As-is where-is" FOB site 1,900,000.- USD
+ Dismantle: $150,000.- USD
TOTAL 3,950,000.- USD

SCOPE ON REQUEST

For more information ask by Email

 

Back to Homepage 

  

 

Gas Turbine (G 24 heavy fuel oil/ crude oil), Generator (40 MVA) 

now only 8 units left!!

This offer provides for the delivery of Power Plant Equipment with currently 12 (now only 8 units left!!) units of 25 MW electrical output each. The minimal offer consists of the supply of 4 groups, each including Gas Turbine (G 24 heavy fuel oil/ crude oil), Generator (40 MVA) and related auxiliary equipment.

 1.   Technical Data

1.1 Performance Data per Equipment Group 

· Design                                                 heavy duty, easy to maintain

· Electrical Output                                 ~ 25 MW

· Efficiency                                            ~ 24 %

· Turbine Inlet Temperature                  750 ° C

· Turbine Outlet Temperature               340 ° C

· Generator Voltage                               10.5 kV

· Frequency                                           50 Hz

· Fuel Consumption                               ~ 9.3 t/ h

· Calorific Value of Oil                           ~ 40 000 kJ/ kg 

 

        Fuel 

· Liquid Fuel                                     Heavy Fuel Oil/ Crude Oil

 

        Generator 

· Output                                                       40 MVA

· Speed                                                        3 000 RPM

· Voltage                                                      10.5 kV

· Enclosure                                                  IP 54 ICW 37

· Insulation System                                     F

· Excitation                                                  static

 

        Start-up Motor 

· Output                                                       2.5 MW

· Voltage                                                      6.3 kV

 

        Main Transformer 

· Output                                           40 MVA

· Voltage                                          10.5/ 6.3 kV

110 kV

        Auxilaries 

·           Lubrication System

·           Control System

·           Instrumentation

·           Fuel System

·           Electrical Equipment

·           Spare Parts

 

        Additional Data 

·           NOx Emission                         < 500 ppm

·           Manufacturer                          Bergmann- Borsig Berlin

·           Number of Machines              6

·           Location                                  Germany

·           Operating Time                       average 4 000 h

·           Starts                                       average 2 000

·           Time for Dismantling              ~ 1 month

·           Time for Shipment                  depending on new Site

·           Time for Erection                    ~ 3 months

·           Layout                                     located on Steel Foundation in a Power House

·           Weight                                     ~ 350 t

  

2.   Commercial Data

 

2.1 Basic Equipment 

Gas Turbine and Generator (approx. 3 000 h) together with

Auxiliary Equipment as per Technical Data Description              2.70 Mio € each

 

2.2 Scope of Services 

2.2.1 Test/ Dismantling/ Packing 

Expertise and Electrical Test of Generator

Dismantling, Packing for Seafreight

Transport and Insurance to German Port                                    0.800 Mio € each

 

Time required for dismantling, packing and transport to

German harbour approx. 6 weeks for 4 Units.

 

2.2.2 Maintenance Issues 

New Air Filters

Noise Dampers

Stacks

State of the Art I&C/ New Turbine Controller (no Control Room)

Fuel Heating Device   

Price 1.480 Million Euro each ---  PRICE NEGOTIABLE!!

 

 

 

(7) x 5.6 MW, De Laval Generator Sets

13.8 kV, 3 phases, 60 Hz, 450 rpm

 

Diesel Engine

      Manufacturer                                            De Laval Enterprise, USA

      Model                                                           DSRV 16-4

      Type                                                              Four-stroke-cycle, Turbocharged, After-cooled

V-type with Trunk-type Pistons, Stationary Diesel

      No of Units                                                 Seven (7)

      Rated Output                                            8905 Hp (6643 kW)

      Dependable Capacity                             7506 Hp (5600 kW)

      Speed                                                           450 rpm

      No of Cylinder                                           16

      Cylinder Bore                                             17 inches (430 mm)

      Piston Stroke                                             21 inches (530 mm)

      Specific Fuel Rate                                     50% - 0.378 lb/BHp-hr (0.230 kg/BkW-hr) (HFO)

75% - 0.371 lb/BHp-hr (0.226 kg/BkW-hr) (HFO)

100% - 0.384 lb/BHp-hr (0.233 kg/BkW-hr) (HFO)

      Total Length                                                               232 inches (5890 mm)

      Width                                                            180 inches (4572 mm)

      Height                                                           150 inches (3810 mm)

      Total Weight                                              Approximately 250,000 lbs (113 tons)

      Fuel                                                               Bunker C (continuous)

Distillate (start and stop)

      Heat Rate                                                    each 6736 Btu/BHp-hr (9029.5 Btu/BkW-hr)

      Fuel Heating                                                              Steam from Waste Heat Recovery Boiler

      Type of Control                                         Automatic (PLC, GE Fanuc), Remote

Generator

      Manufacturer                                            Electric Machinery/Dresser Rand

      Type                                                              Brushless Synchronous Generator

      No of Units                                                 10 units

      Rated Capacity                                          8.019 MVA / 6.415 MWe

      Dependable Capacity                             5.400 MWe

      Rated Voltage                                           13.8 kV

      Rated Current                                           335 Ampere

      Rated Speed                                                              450 rpm

      No of Phase                                                               3

      Frequency                                                  60 Hz

      Power Factor                                             80%

 

< Short Story >

      Complete set with all auxiliary equipment (Please refer to pictures)

      Overhaul History : In 1997, all these generator sets had been overhauled in the original manufactory (De Laval Enterprise) and with Certification of overhauled

      YOM : 1973

      Running hours : about 41000 hours (total), 40000 hours (after overhaul)

Since 1973, these Gen-sets were working in a mine total 1000 hours (only for tested running) and then the mine was disused by government later. Since 1997, A National Power Plant purchased all of the sets as used equipment. Based on the national law rule, all the Gen-sets must have a overhaul certificate from the original manufactory, either new or used. So they hired the original manufactory (De Laval Enterprise) to overhaul all of the Diesel Engines and the Alternators, and upgraded the generator sets with PLC of GE FANUC. So, the total running is about 40000 hours from 1997 until 2004.

     Quantity available for now : seven (7) sets of 6643 kW (rated output)

            Current Location : South East Asia

Price:  4,120,000.- USD

 

 

36.5 MW  PG6471-B       GT          

Gas turbine brand      Nanjing Turbine JV GE             

GT country of origin   China     

GT model        PG6471-B          

date of Manufacture  1994      

running hour   29845    

rated output power MW        36,5       

GT fuel            HFO, diesel       

last date of overhaul  July.2004           

hour left until next overhaul  15000 hours      

number of start up     2057 times        

turbine control           Mark IV             

generator maker        Nanjing Turbines Works          

generator model        QFR-36-1          

generator output voltage      10 kV     

output frequency        50Hz      

 control           Hz          

generator output power        36000kW          

diesel start up engine            Detroit V71T 630hp      

HRSG   Harbin Boiler Factory               

boiler output   65T 3.82MP 445C         

steam turbine maker Nanjing Turbine Factory          

steam turbine model QF-15-2 , output power 15MW           

 gear box        TP3000              

control panel  1 set      

air inlet system          1 set      

exhaust system           1 set      

CO2 panel       1 set      

high voltage switch panel      GG-1A(F)2-03    

main transformer      SF8-63000/110             

plant transformer      SF 1250/10     

 

 

16 MW Caterpillar 3616 Diesel Power Plan

(4) x 4 MW

11 kV, 750 rpm

Make & Model : Caterpillar, 3616

Installed in 1996

Working hours : 20194, 20358, 19321, 21980

 

Alternator:

Make : AVK, Germany

Type : DIDBV P/8

No. : 8418138A002

50 Hz,, 5163 kVA  each

750 rpm, 3 phases, 11 kV

 

EXCT   44 V, F Class, IP 23, K752.2.23, 85V, 200 Hz, 20 tons

1250 W, 220 V, 3.6A

Make : 1995

CAT 3616

BHP 5793, 750 rpm, 4320 kW

C/S  50 , 5163 kVA, 11 kV

Year : 1995

 

Fuel Consumption : 0.057 gallon per kWh

 

Including:

Engine : 4 units

Alternator : 4 units

Cooling Towers

Lube Oil Filters

Exhaust System

Control Panels

Synchronizers

Other related Panels

Auxiliaries

Fire Fighting and other Controls

Price for the complete Plant : 2,398,000.- USD as is where is

 

 

3 x 5.2 MW Model #18KU30A  

Mitsubishi Generator Sets 

Three Mitsubishi 5.2MW generator.

year 2003

5000kw

6600kva

60Hz

Hours: 10,000 - 15,000 each

3 sets

$660,000.00 each As is where is (Complete with Fuel Treatment Module)

More pictures on request

 

 

 

30 MW Sulzer Power Plant, 60 Hz  

with complete auxiliaries and spare parts.

Please note that the units were installed in early and middle part of 90's..... well maintained.

I. ENGINE:

Make Z.U.T. ZGODA SULZER (Poland)

Model 12 ZV 40/48

Serial numbers 50612

Nominal Power of Diesel Engine 6180 kW (measured at shaft under ISO conditions)

Number of strokes 4 (four)

Cylinder Power 550 kW/cylinder

Number of Cylinders 12

Nominal speed 514 rpm

Maximum power in one hr 7260 kW (during 12 operating hr. each)

Piston Diameter 400 mm

Piston stroke 480 mm

Cylinder capacity 60.82 L/cylinder

Effective pressure 1.99 MPa.

Combustion pressure 12.8 MPa

Average piston speed 8.224 m/s

Flywheel effect (W*R sq.) 4.94 Tm?

Note:

The nominal power of the Engine corresponds to the operating instructions of ISO 3046.

Under the above conditions and assuming a calorific value of 42.707 kJ/kg, the specific fuel

throughput is as follows:

100% load 201 g/kWh + 5%

75% load 201 g/kWh + 5%

50% load 205 g/kWh + 5%

Lube-oil consumption - the consumption in the lube system of the working face of the Cylinders

amounts to 80% of the total consumption

Amount of heat dissipated by the Engine : 290 kW

Combustion air consumption under nominal conditions : 52,500 kg/hr

Air cleaning (by means of NSA filter) : up to 5 g/m3 solids

Mass of Exhaust under nominal conditions : 53,800 kg/hr

Temperature of gasses after turbo compressor under nominal conditions : 340 0C

Noise level at suction and exhaust sides after silencer : 85 dBA

Operating parameters stable minimum speed : 320 rpm

Admissible operating duration at no load : 30 min.

A) Barring Gear (Turning Gear)

B) Turbocharger (Left & Right)

C) Air-cooler (Left & Right)

II. GENERATOR

A) Brushless AC Generator

Make Ideal Electric, (OHIO, USA)

Model Type SAB

Capacity 7500 kVA (6000 kW)

Frame M8-31

Voltage 13,800 V

RPM 514

Amp. 314

Phase / Hz 3 / 60 Hz

Wire 6

Duty Continuous

Power factor 0.8

Class Ins. F

Temp. rise 105 0C

Rise by Res. Amb. temp. 40 0C

B) Brushless Exciter

Type FRBA

Frame BE 16-6

kW output 50

DC volts / Amp. 250 V / 200 A

Class Ins. F

Fld. Volts / Amps. 125 V / 8.8 A

Temp. rise 80 0C

Exciter surge prot. B57826-GR1

Rectifiers qty. 3 no. B-54922-F, no. B-54922-R

C) Permanent Magnet Alternator

III. AIR SYSTEM

1) Suction Air

A) Locker Air-Maze Heavy Duty Oil Bath Air Filter (2 Units)

B) Air Suction BR

C) Expansion Bellows

2) Control Air Equipment

A) Air Bottle

B) Condensate Drain

C) Pressure Reducing Valve

D) Air Dryer

E) Automatic Drain Valve

F) Filter

IV. WATER SYSTEM

1. Raw Water System

A) Cooling Tower

B) Raw Water Pump (Running)

C) Raw Water Pump (Spare)

D) Raw Water Strainer

2. Jacket Water System

A) Jacket Water Heat Exchanger (Alfa Laval)

B) Jacket Water Thermostat (AMOT)

C) Jacket Water Pump (Running) (Ajax Elite)

D) Jacket Water Pump (Spare) (Ajax Elite)

E) Circulating Pump (Ajax Elite)

F) Jacket Water Expansion Tank

3. Nozzle Cooling Water System

A) Nozzle Cooling Water Pump (Running)

B) Nozzle Cooling Water Pump (Spare)

C) Heater

V. LUBRICATING OIL SYSTEM

A) L.O. Separator Module (LOPX 707)

B) Feed Pump (running)

C) Feed Pump (spare)

D) Pre-Lube Pump

E) Oil Cooler

F) Lube-Oil Filter (Boll and Kirch Auto back-flushing)

G) Indicating Filter (Boll and Kirch)

H) Thermostatic Valve (AMOT 6BO)

I) Cylinder Lube-Oil Tank

J) Lube-Oil Sump Tank

K) Lube-Oil Sludge Tank

L) Lube-Oil Sludge Tank Pump

VI. FUEL OIL SYSTEM

1. Three-way Valve for HFO/MDO

2. Supply Pumps

3. Pressure Control, Overflow Valve

4. Flow Meter

5. Deaeration System

6. Circulating Pumps

7. Steam heat exchanger

8. Electric heat exchanger

9. Viscosity transducer

10. Filter Arrangement

11. Alarm Cabinet

12. Fuel Sludge Tank

13. Fuel Sludge Tank Pump

VII. EXHAUST SYSTEM

A) Silencer (rolled plate)

B) Smoke Stack (rolled plate)

C) Ducting

D) Expansion Bellows

Price 4,340,000.- USD

 

 

 

From Circular July 2008 I

7.6 MW Cogeneration Gen-Set (MAN B&W Holeby)
Price 1,950,000.- Euro

 

2x5MW Mitsubishi Diesel Power Plant

Price: 2,850,000.- USD 

 

3 x 1.1 MW Caterpillar Gen.Sets
Price: 950,000.- Euro

Ruston TB 4000 Gasturbine
Price: 425,000.00 EURO
( incl. dismantling, packing, loading, transport FOB )

 

 

Several new unused Frame 9'S
FULL SCOPE ON REQUEST

 

One ( 1 ) Used  low hour 100 Mw Coal Fired Powerplant
Price: 7,500,000.- USD

 

10 units Komatsu 545kw
Price 1,500,000.- USD for a quick sale


105 MW Siemens Gas Turbine Plant
Price 16.5 Million USD

2 (two) Sets 56 MW each
Price is 5.25 Million USD each


Two each Westighouse model W-251b 4
Price 3.85 Million USD each, plus any removal and freight charges

 

4 each GE Frame 5-la Gas Turbines

Price 3.45 Million USD each

 

Two each 10.25 mw Turbine sets

Price 2.35 Million USD  each

 

42 MW 108 bar/ 520°C/ 150 t/h Back Pressure Turbine
Price: 8,300,000.-. EUR

3,8 MW Gas 10,5 Centaur H and Ecoair Gas Compressor
Price: 525,000.- EUR

  

 

100 MW Power Barge

with Pratt & Whitney FT4C-1D gas turbines on diesel or natural gas

The FT4C-1D Twin Pac is an outdoor, completely self-contained, automatic, gas turbine powered electric generating plant, nominally 50 HZ rated at 51 MW at 15* C. The unit contains all the equipment required for local unattended operation and provisions for interconnection to a remote control panel.

Price is 45 Million USD

 

 

 

92 MW Power Barge

with GE Frame 6B gas turbines on diesel

Price  51 Million USD

with HFO option for an additional 5 Million USD

 

Best regards

CH Non-Food Import-Export Corporation

British Virgin Islands

Phone: +1 206-201-2420

Fax:     +1 206-337-0754

Phone Brazil: +55 21 3521-7225

:office18@ch-non-food.com

http://www.ch-non-food.com/