PLANT |
1.top
AVAILABLE GENERATORS
Turbine Generator
Item Type @ Parameter delivery running (years) Price(USD)
1 1500KW 21-1.5/13Kg 1960 3 74,650 3 sets
2 1500KW 21-1.5/13Kg 1960 5 58,670 3 sets
3 1500KW 21-1.5/13Kg 1962 10 44,200
4 750KW 21-0.75/13Kg 1968 0 45,630
5 750KW N0.75-35 1985 4 127,540
6 750KW N0.75-24 1968 1 76,100
7 750KW N0.75-24 1993 0 127,540
8 1500KW N1.5-24 1969 3 81,900
9 1500KW N1.5-24 1972 1 110,120
10 3000KW N3-24 1979 10 143,500
11 3000KW N3-24 1989 4 259,580
12 3000KW N3-24 1983 4 143,500
13 3000KW N3-24 1978 3 128,980
14 3000KW N3-24 1988 5 172,515
15 3000KW N3-24 1981 8 160,900 2 sets
500 kW
UNIT 1 CUMMINS Skid-mounted
Twin turbo V-8, solid state controls
Kohler 500ROZ 71 VTA 1710G1
227/480 V P.F. .8
1800 RPM Mfg. 5/82
Cont. rating 500 kw / 625 kva
753 AMPS
UNIT 2 CUMMINS Turbo charged 6 cyl.
Kohler 500 RZ77 KTTA19G2
277/480 V P.F. .8 1800 RPM
Engine #37130917 K19 Family
Mfg. 3/90
Cont. rating 450 kW / 562 kva / 677 AMPS
Stdby. Rating 500 kW / 625 kva / 752 AMPS
LOW HOURS
Immediate availability…………..F.O.B. NEW YORK
Price……………….$ 35,000.00 each
THESE UNITS ARE PRICED TO MOVE, 10% DEPOSIT
HOLDS UNIT FOR PICK-UP / DELIVERY.
PRICE $ 28,500.00
IMMEDIATE AVAILABILITY
Basic Technical Specifications:
Manufacturer : SIEMENS / KWU
Year of manufacture / installation : 1975 / 1978
Thermal power : 770 MW (MJ/s)
Thermal power : 326,4 MW
Speed (corresp. to 50 cycles) : 3000 RPM
Live steam pressure inlet : 159,5 bar
Live steam temperature inlet : 495 =BAC
Live steam mass flow : 346.169 kg / s
(corresp. live steam quantity) : 1246,2 t / h
Condenser pressure : 0,047 bar
Exhaust steam mass flow : 201,284 kg / s
(corresp. condensate quantity) : 724,6 t / h
Condenser surface : 11024 m2
Cooling water quantity : 39960 m3 / h
Cooling water temperature : 12,6 =BAC
Number of condenser tubes : 14398 off
Tube internal diameter : 23,4 mm
Water separator (parallel) : 2 Off
Regenerative preheating : 6 stages
Regenerative preheating temperature : 252,9 =BAC
Generator apparent power : 4O9 MVA
Power factor cos phi : 0,8
Generator voltage : 21.0 kV
Operating hours : NONE, only mechanical turning
History:
The Power Station was built for an Atomic Power Station which has
never been operated. The unit is well preserved with regular and
periodical mechanical turning. Boilers are not Included in the
package. New boilers can be constructed according to client's fuel
specifications (gas, coal, heavy oil, etc.), in the country of
installation.
“AS IS, WHERE IS” COST……….$ 9MIL USD
RELOCATED…….ADD…………..$10MIL USD
WARRANTY AT ADDITIONAL COST TO PURCHASER, PRICE MAY BE NEGOTIATED UPON INSPECTION.
9. top
SOLD
| 5 - 2,000 KW EMD MP 36 skid mounted and enclosed generator sets consisting of 2,875 HP EMD Model 16-567-D4 2,000 KW EMD Model A20-A synchronous generators , |
| EMD Engine Model 16-567D4 (Electro-Motive Division General Motor Corp.) |
2500 HP 1800 RPM WESTINGHOUSE FRAME 5010
WPII ENCLOSURE 2300V
2250 HP 1800 RPM L.A. FRAME 7310 ES
TETC ENCLOSURE 4160V
1250HP 1800 RPM REL. FRAME 6809S
TETC ENCLOSURE 4160V
1250HP 3600 RPM WESTINGHOUSE FRAME 6814-H
D.P. ENCLOSURE 2300V
LOUIS-ALLIS 4500HP Motor 1785RPM 4000V
FRAME 7411Z WPII ENCLOSURE W/ STARTER
1500HP SYNCHRONOUS MOTOR 1200RPM 4160V
FRAME 62 WPII
5500HP CENTRIFUGAL COMPRESSOR
CLARK 3M9-6 19,467 ACFM
17 PSIA IN 160 PSIA OUT
18. top
INGERSOLL MULTISTATION
TURN, BORE AND THREADING MACHINE
Including the Equipment Listed on own site
19. top
100 MEGAWATT
BARGE MOUNTED POWER PLANT
We can provide a 100 MW Barge Mounted Power Plant, complete, ABS Certified, consisting of two (2) 50 MW Gas Turbine Generators.
Outputs are at ISO conditions. These units will be refurbished and ready to operate on either Natural Gas or Fuel Oil and installed on an ABS certified barge. Delivery can occur within approximately
180 working days after receipt of funds as specified below.
The two Gas Turbines will be set up to operate singularly or in parallel.
The Generator output will be 10,800 volts, 3-phase, 50 HZ. The power will be transported to shore by overhead transmission lines at Generator voltage. A control room will be provided together with switchgear and circuit disconnects.
The customer/buyer will be responsible for providing all fuel needs including delivery and storage of fuel. The customer will also be responsible for all Grid connections and transformation of power.
We will provide, as part of the Barge package, an emergency generator for lighting and Barge pumps. The Turbines can be started with electric motors powered from the emergency generator (diesel fueled) or by pressurized air.
All of this equipment is offered subject to prior sale. The costs will be adjusted accordingly if additional or substitute equipment is required by customer.
The two (2) Gas Turbines can be adapted to operate on Heavy Fuel (HFO) or Bunker “C” or #6 Fuel oil, providing proper oil treatment modules are utilized. We will offer this equipment under separate Contract.
100 MEGAWATT
POWER BARGE
ESTIMATE OF COSTS:
We estimate this entire 100 MW Power Barge can be furnished as described for approximately $250.00 USD/ kW or $ 25,000,000.00.
Any commissions, “finders fees”, or other unidentified costs, shall be added to the cost shown here.
To prepare a formal quotation and provide detailed equipment specifics, i.e. model numbers, serial numbers, etc., a one-percent (1%) Cash Advance and an Executed “Non-Disclosure, Non-Compete, Non-Circumvent agreement must be signed by the “end-user”. It will take two (2) weeks, after receipt of one-percent (1%) cash advance funds, to prepare the Formal Quotation.
After receipt of the Formal Quotation/Proposal, buyer shall have two (2) weeks to place a five-percent (5%) refundable deposit which will allow him thirty (30) days to perform “due diligence”. At the end of this “due diligence” period, buyer shall pay eighty-five percent (85%) of the total purchase price. The balance due shall be paid upon customer acceptance of the unit.
Currently, we have a “window” of opportunity open to immediately initiate necessary engineering work. This work will be accomplished by “World Class” Maritime Contractors; therefore, meeting the highest of
Standards.
ACCESSORIES:
BURGESS inlet air filter and piping, air correction turbulent contact absorbers, jacket water heat exchangers, 1000 BTU/HP, intercoolers, before and after pumps, intercooler pumps, engine lube oil filters, scrubber system, American filter, including pump and tank, air compressors for air starting and pneumatic controls, air receiver tanks, and many other accessories
These units were installed in 1970-72. The facility that provided fuel was closed down in 1994 and the equipment has been removed and stored in a temperature- controlled warehouse. Worthington has been acquired by Dresser-Rand, and spare parts are readily available. The equipment is immediately available, subject to prior sale.
Price per unit, as is, FOB New York…$ 165,000.00 USD
There are also approximately $ 350,000.00 worth of spare parts, including a spare generator, that can be purchased for $ 75,000.00 USD.
CAT 3608 DITA (3004 B.H.P.)
2 AVAILABLE, SOLD ONLY AS A PAIR
TURBOCHARGED DIESEL
MARINE ENGINES, DEEP OIL PANS
ABS CERTIFICATIONS
STANDARD ROTATION, CAN BE TURNED
1000 RPM, DRY MANIFOLD, FIBERGLASS
INSULATED BLANKETS/WRAPPERS
INDUSTRIAL STATIONARY USE 1990-1991
5400 AND 6700 DOCUMENTED HOURS
CAT MAINTAINED, perfect condition
With all upgrades and off-skid heat exchangers
Heavy steel skids with air clutch drive and sheaves, center
Jack shaft 10 ft. long with 48 groove sheave, 9 ft. long drive shaft
DE-INSTALLED
F.O.B TEXAS
PHOTOS E-MAILED UPON REQUEST
$ 750,000.00 USD FOR THE PAIR
NEW COST APPROX. $650,000.00 EACH
With a 27 WEEK WAITING PERIOD
10% DEPOSIT HOLDS EQUIPMENT PENDING INSPECTION
*******PLEASE FAX OR E-MAIL FOR ADDITIONAL INFORMATION*******
MORE AVAILABLE GENERATORS
GAS…..6 EA. 15kw Generac Skid Mounted, natural gas/propane, complete with radiator and Controls, like new condition, 100 hours + - $ 4950.00 each
GAS…..6 EA. 30kw Generac Skid Mounted, natural gas/propane, complete with radiator and Controls, like new condition 100 hours + - $7400.00 each
GAS….2 EA. 37.5kw Generac Skid Mounted, natural gas/ propane, enclosed with radiator and Controls, like new condition, 500 hours + - $7750.00 each
GAS….2 EA. 45kw Onan/Kohler Skid Mounted, natural gas/propane, enclosed with radiator And controls, 350 hours + - $7950.00 each
DIESEL 1 EA. 33kw (45kva) Kohler Skid Mounted, diesel, enclosed with radiator and controls, 350 hours + -, with Cummins 4B-3.9 engine $7450.00 each
GAS…...1 EA. 55kw Kohler 1-H, skid mounted, natural gas/propane, 600 hours, enclosed with Radiator and controls $8450.00 each
GAS……1 EA. 115kw Waukesha, F1197, skid mounted, natural gas, 500 hours, with heat exchanger $19,500.00 each
DIESEL..1 EA. 200kw Kohler with Detroit Diesel, enclosed, 0 hours,
new condition $ 19,900.00 each
DIESEL..1 EA. 250kw Detroit Diesel, skid mounted with controls, 350 hours + -, EXCELLENT $24,900.00
DIESEL..1 EA. 250kw Waukesha F1197, skid mounted, with controls,
500 hours + - $19,900.00
GAS……3 EA. 275kw Waukesha Climax V-125, 900 RPM, natural gas, with switchgear $29,750.00
DIESEL...3 EA. 450kw Cummins Diesel VTA 1710, skid mounted with radiator, 600 hours $43,500.00
GAS……1 EA. 565kw Superior Cooper 8G825, 900 RPM, natural gas, co-gen
heat exchanger $65,500.00
DIESEL..1 EA. 565kw Superior 40-SX-8 Diesel (White), 900 RPM with radiator, 1900 hours $58,500.00
DIESEL..4 EA. 1100kw Worthington, dual fuel, natural gas/diesel/heavy fuel, 360 RPM $ 125.00 / kw
DIESEL..4 EA. 1500kw Worthington, dual fuel, natural gas/diesel/heavy fuel, 360 RPM $ 125.00 / kw
DIESEL..4 EA. 2750kw EMD Diesel, 900 RPM, low hours, skid mounted with radiators $ 175.00 / kw
860kw @ 50 Hz
1000kw @ 60Hz
CUMMINS DIESEL MODEL KTA50-G, SN 33101373, PRIME POWER,
1800 RPM, 4160V, 3 ph., 60Hz 3300V, 3 ph, 50Hz Electric
Start, electronic governor, installed in 25 ft. semi-trailer, skid mounted, dual exhaust silencers, less than 4000 hours on meter. $98,500.00
860kw @ 50 Hz
1000kw @ 60Hz
MIRLEES DIESEL MODEL JVST-12, SN 5447-1, 900 RPM, skid mounted,
40 Hour SMOH. Weight 56,000 lbs. With remote radiator, circ. pumps $ 112,000.00
900kw WAUKESHA DIESEL, only 720 hours since new, MODEL L5100 DSIU,
1200 RPM, 12-cyl., 277 / 480V, 3 ph, 60 Hz $ 49,500.00
600kva CUMMINS DIESEL GENSETS, MODEL VT-1710, LIKE NEW,
375 total hours $ 43,500.00
AS OUR INVENTORY MOVES VERY QUICKLY, IF YOU REQUIRE ADDITIONAL SPECIFICS, PLEASE REPLY AS SOON AS POSSIBLE.
360 RPM, heavy duty, dual fuel, 8 cylinder, 2120 BHP,
turbocharged, aftercooled, complete with Ideal Generators,
Salient pole, 20-pole, Type SAM, 1500kW
1875 KVA, 4160 volt, 3 PH, 60 HZ (can be converted to 50 HZ)
with static exciter FUEL…..sewer gas, diesel, heavy fuel, natural gas, and
CAN BE ADAPTED to use NAPTHA at an additional cost
ACCESSORIES:
BURGESS inlet air filter and piping, air correction turbulent contact absorbers, jacket water heat exchangers, 1000 BTU/HP, intercoolers, before and after pumps, intercooler pumps, engine lube oil filters, scrubber system, American filter, including pump and tank, air compressors for air starting and pneumatic controls, air receiver tanks, and many other accessories
These units were installed in 1970-72. The facility that provided fuel was closed down in 1994 and the equipment has been removed and stored in a temperature- controlled warehouse. Worthington has been acquired by Dresser-Rand, and spare parts are readily available. The equipment is immediately available, subject to prior sale.
FOB New York
Price per 1500 kW unit, as is,
$ 165,000.00 USD
Price per 1100 kW unit, as is,
$ 145,000.00 USD
PLUS additional cost for Naptha adaptation
There are also approximately $ 350,000.00 worth of spare parts, including a spare generator, that can be purchased for $ 75,000.00 USD.
84 MW at 20 degrees C 100 MW at -23 degrees C
ABB Combustion Gas Turbine and Generator designation ABB 11N
Fuel: The unit uses #2 diesel fuel, it could be modified for other fuel use.
Heat Rate on Diesel = 12,300 BTU / KWH at -20 degrees C ( in 1993 ). Simple cycle.
Operation: Total starts to end of 1998 - 226, total operating hours 462.4. Unit is peak load operation.
Maintenance: Last ‘B’ inspection 1996., 26.3 operating hours since.
Generator: ABB, 137 kVA, 0.8 PF, 13.8 kV.
Equipment List
The equipment which is included with the complete ABB 11N1 gas turbine including all auxiliary equipment associated with a single unit including but not limited to the following individual items:
1. Gas Turbine Blow Off Silencer Adder
2. Gas Turbine Air Intake Manifold
3. Gas Turbine Platforms, Ladders, Etc.
4. Gas Turbine Air Intake Duct
5. Intake Expansion Joint
6. Gas Turbine Air Intake Filter Including Electrical Control Panel
7. Gas Turbine Exhaust Gas Stack Including Anchor Bolts, Insulation, Etc.
8. Closed Cooling Water Expansion Vessel
9. Gas Turbine Closed Cooling Water Pumps
10. Gas Turbine Lube-Oil System & Oil / Water Cooler
11. Gas Turbine Water Air-Coolers
12. Fire Extinguishing Gas System Gas Turbine-Outdoor-Enclosure
13. Gas Turbine NOx Injection Water Filtering & Pump Including Electrical Motor, Instrumentation with Junction Box
14. Gas Turbine Cooling Water & Various Valves
15. Hangers
16. Gas Turbine Generator Bus Duct with Accessories between Generator and Generator Circuit Breaker
17. 230 KV Step-Up Transformer
1. Gas Turbine-Outdoor Enclosure including Lighting & Ventilation
2. Gas Turbine Thermal Block
3. Gas Turbine Combustion Chamber and Burner including Insulation, Control Parts, Etc.
4. Miscellaneous Gas Turbine Equipment Associated Directly to the Unit Designated as #4
5. Gas Turbine Hydraulic Control & Auxiliary Block & Control-Cooling-Air Coolers Complete Assembled and Foundation Anchors
6. Compressor Blow Off System & Silencer
7. Gas Turbine Intermediate Block & Shaft & Vibration
8. Gas Turbine Water Injection Control Block
9. Gas Turbine Oil Fuel Pump Block
10. Gas Turbine Ignition Block
11. Gas Turbine Exhaust Gas Diffuser including Insulation
12. Gas Turbine Generator, Exciter, Coolers
13. Gas Turbine Generator Breaker
14. Gas Turbine Generator Breaker Module DD
15. Gas Turbine Generator Output Cubicle
16. Egatrol Gas Turbine Control System
17. Gas Turbine AVR Cubicle Unitrol
18. Gas Turbine Generator Protection Cubicle GSX10
19. Control Enclosure Module AA
20. Batteries
21. Fuel Forwarding ( Booster ) Pump
22. High Voltage Motorized Disconnect Switch
23. Stack ( including Silencer )
24. Operations and Maintenance Manuals ( 1 Copy )
25. Drawings ( 1 Set )
26. Gas Turbine Starting Device
Price Rebuilt and Guaranteed for One Year $ 16,500,000.00
Relocation and Technical Assistance is also available
Subject to Prior Sale
(A) 2 UNITS AVAILABLE FOR IMMEDIATE SHIPMENT
(B) 2 UNITS READY FOR SHIPMENT WITHIN 90 DAYS APPROXIMATELY
(C) 2 UNITS READY FOR SHIPMENT WITHIN 180 DAYS
(D) 2 UNITS READY FOR SHIPMENT WITHIN 270 DAYS
THESE ESTIMATED DELIVERY DATES ARE BASED UPON UNITS BEING AVAILABLE THAT WE CAN ONLY OFFER “SUBJECT TO PRIOR SALE”, AS THEY ARE OUT ON QUOTATION AND MAY BE PURCHASED BY OTHERS AT ANY TIME. THERE ARE MANY VARIABLES THAT HAVE TO BE EVALUATED BEFORE A FIRM QUOTATION CAN BE MADE.
THE COST OF THE EQUIPMENT DELIVERED TO INDIA PORT WILL NOT EXCEED $450.00 / kW.
Road Town - Tortola
British Virgin Islands
Fax: +1 206-337-0754 /
pwrgenerators@ch-non-food.com
| Main-Page | Commodities | Field Hospital | Powerplants | Generators | Napkin Line | R R P | Cement Plants | Heavy Equipment | Yachts |